Hola Folks!
About a year ago, the 9vdc adapter for my MexiStim came unplugged and I
wasn't aware of it for almost a month. During a cleaning, I opened the
box to dust and didn't see the LED flashing so tracked it to the adapter
on the strip which was plugged into the wall outlet. I hadn't noticed
anything unusual as to energy levels, allergies, etc..
Over my mattress, I have a foam pad about 1.5-2 inches thick. Between
the foam pad and the mattress I have a 4 X 5 foot sheet of aluminum
screen that is always connected to the 3vdc MexiStim with sheets and
then covers over that as needed.
Lee Crock believes his machine somehow couples to the aura of the body
to transfer energy and assist in healing and pain resolution. So he
recommends the screen be located no more than 6 inches from the body.
My screen is roughly 2-3 inches from my body all night, no physical
contact except from the head of the bed down to 5 feet, below my head
and most of my body.
Here is the purpose of this post....I'd had the unit plugged in and
working for almost 4 years with no ill effects.
When this happened and I plugged it back in 11 months ago, the first
night I had exceptionally VIVID dreams, very clear, sharp and real...not
lucid since I wasn't conscious that I was dreaming, just that they
seemed so real.
I wrote it off as imagination or something else as I'd not seen that in
the literature of reports about effects from low voltage fields like the
Crock machine (4.5vdc, portable and sells for $900) and my MexiStim
(3vdc, requires adapter and sells for $200 plus S&H) appears to put out.
I don't keep spare machines built up since I sell them on a per order
basis. One fellow wrote in wanting one asap...I didn't have all the
parts handy so told him all I had was my machine which was over 3 years
old but working flawlessly or he could wait 5 days until I got the parts
delivered...he said he'd take it if I'd part with it...ok...cleaned it
up a bit, made him up a wirescreen and new cable, packed it up and sent
it off.
Result, no MexiStim for me to use for nearly 3 weeks until I got new
parts. Finally built up one for me and hooked it up last night. That
night, again with the VIVID DREAMS...3 different and very sharp dreams.
I don't know if this is some psychomatic projection or expectation on my
part, though I never even thought about it, or if there is something odd
about low voltage triggering vivid dreams.
With the Crock and MexiStim machines, it is not required to physically
contact the wirescreen which isn't even part of a closed circuit...its
ONLY DC from 10 batteries, positive or negative. Teslas one wire
circuit...<LOL>...
You can experiment with a manual version by following the wiring diagram at;
http://www.keelynet.com/mexstim/nexcrock.htm
and add a switching circuit if so inclined.
Its just weird that there isn't any measurable electrical conduction and
yet twice now, after no MexiStim for 3 weeks to a month, when I hook
back up, that I would have these vivid dreams.
If anyone has experienced this with low voltage circuits or with a Crock
type screen or Eeman screen, I would like to know more about it. Will
see if I have more this 2nd night of use.
--
Jerry Decker - http://www.keelynet.com
Donations to support KeelyNet: http://www.keelynet.com/donate1.htm
Public Archive http://www.escribe.com/science/keelynet
Order out of Chaos - From an Art to a Science
