Everything looks OK here - but the fastest link I have is 1GB :) Doug
>>> [EMAIL PROTECTED] 08/28/03 04:12PM >>> You're right, but there's also a general problem about the thickness. IM draws my OC48 links the same he draws my DS3 links ! This is not coherent at all. --On Thursday, August 28, 2003 12:46:14 PM -0700 Doug Weathers <[EMAIL PROTECTED]> wrote: > About the thickness of the link lines: a line looks thicker when it's at an angle > than when > it's horizontal or vertical > > This is probably because of the shape of the "pen" used to draw the line - it's > square, and > wider across the diagonals. > > If it were possible to draw the lines with a circular "pen", they'd look the same at > every > angle. > > Is this practical? > > Later, > > Doug > > > -- > Doug Weathers, Network Administrator > St. Charles Medical Center > >>>> [EMAIL PROTECTED] 08/28/03 06:36AM >>> > Hello there, > > this is a really important feature request to me. > > I'd like it possible to define a default duplex value for (giga|fast|*)ethernet > interfaces. I > have some maps with dozens of ethernet links, all full-duplex (who does half again > ??), and > it's such a pain to have to go on each link to specify it's a full duplex one. > > I know IM can't determine this as there's no standard SNMP object for this (as far > as I know > and have looked for), but just an option to specify the default, please :) > > Another request (already asked for it with no answer): the drawn links sizes are not > coherent. > I have some 2,5Gbs links that appear smaller than the gigabit links. Could the > thickness of > the link really be dependent of it ifSpeed, and not just react on gigabit ones ? > > > Thank you. > -- > Jerome Fleury > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > > > > > IMPORTANT NOTICE: This communication, including any attachment, contains > information that may be confidential or privileged, and is intended solely > for the entity or individual to whom it is addressed. If you are not the > intended recipient, you should delete this message and are hereby notified > that any disclosure, copying, or distribution of this message is strictly > prohibited. Nothing in this email, including any attachment, is intended > to be a legally binding signature. > > > > ____________________________________________________________________ > List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] jeje. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] IMPORTANT NOTICE: This communication, including any attachment, contains information that may be confidential or privileged, and is intended solely for the entity or individual to whom it is addressed. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message is strictly prohibited. Nothing in this email, including any attachment, is intended to be a legally binding signature. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
