Tim: The re-registration count for an SM is obtained from its AP's link status table (linkReRegCount, OID 1.3.6.1.4.1.161.19.3.1.4.1.26.<luid>, where luid is the LUID of the SM).
I am guessing that rebooting the AP will reset these counters. I don't know if there is a facility to reset the re-reg count for a particular SM without having to reboot the AP. Ruth Kurniawati Dartware, LLC > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of Tim Huffman > Sent: Thursday, August 04, 2005 11:44 AM > To: [email protected] > Subject: [IM-Talk] Canopy Probe: Re-registration count too high > > We have about 40 Canopy SMs that we're probing with > Intermapper. We have several SMs that are in alarm because > they're report their re-registration count is too high. This > is a hold-over from a recent Canopy firmware issue that > caused multiple reregistrations, and is resolved now. > Unfortunately, the SM probes in Intermapper as still showing > this alarm. > > Where is this statistic stored? How is it computed? How can I > clear it? > > Tim Huffman > Network Administrator > Kruger Communications > Office: 630-281-7100 ext. 335 > Fax: 630-986-2495 > Email: [EMAIL PROTECTED] > > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
