Jim:
--- Jim Hoagland wrote:
On the Intermapper Remote Server Firewall is it possible to permit a
small portion of a Class-c instead of the whole class-c.
x.x.33.128 0.0.0.63 id not can this be added..
--- end of quote ---
>From the manual at the URL below:
---
Entering Address Ranges
You can enter addresses in the access control list in three different formats:
* Fully-specified IP addresses
Example: 192.168.1.10
* Address ranges
Example: 192.168.1.1-31. This specifies any device in the range 192.168.1.1
to 192.168.1.31.
* Addresses with a "*" wildcard Each wildcard corresponds to a
range of 0-255.
Example: 192.168.1.* (equivalent to 192.168.1.1-255)
Example: 192.168.*.* (Class B range)
Example: *.*.*.* ("all addresses")
----
http://www.intermapper.com/docs/WebHelp/04-configuring_intermapper/04-01-server_
settings_window/04-01-03-server_config/firewall.html#addressranges
Please get back to me if you have further questions. Thanks.
Rich Brown [EMAIL PROTECTED]
Dartware, LLC http://www.dartware.com
10 Buck Road, PO Box 130 Telephone: 603-643-9600
Hanover, NH 03755-0130 USA Fax: 603-643-2289
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
