I think I figured it out. I appears that if you have the probe that you have modified selected when you click the 'Reload Probes' button, the description doesn't get refreshed. Selecting another probe then reselecting the modified probe updates the window with the updated text.
Adding password fields to the parameters are properly updated. Dan On 11/9/07 3:29 PM, "Daniel Albaugh" <[EMAIL PROTECTED]> wrote: > > I'm using IM 4.6.4 on an OS X Server v10.4.10 and can't seem to get modified > probes to reload unless I quit the IM Server application completely and > start it back up. I've tried reloading while at the server and using IM > Remote (v4.6.4). Neither seems to work correctly. > > Can any one else verify this? > > ********************************************** > > Daniel Albaugh > Senior Network Technician > Univ. of TN, Health Science Center > Memphis, TN > > 901.448.7044 > > [EMAIL PROTECTED] > > ********************************************** > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > ********************************************** Daniel Albaugh Senior Network Technician Univ. of TN, Health Science Center Memphis, TN 901.448.7044 [EMAIL PROTECTED] ********************************************** ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
