I've never worked with NAGIOS probes/plugins before, so I thought I'd try the default one in Intermapper as mentioned below (check_ping). However, after setting the probe up and tweaking the thresholds, the probe isn't working and I'm getting an error. Here's the error: NAGIOS Probe Performance Data: check_ping -H <NotFound=ADDRESS> -w 100,10% -c 1000,90% Reason: Error attempting to execute command: Couldn't establish path. The command "check_ping" is not available in the specified path (C:\Programs Files\Intermapper\Intermapper Settings\Tools) It would appear I am missing the probe? Intermapper is running the latest version 5.0 on Windows Server 2003.
________________________________ From: [email protected] on behalf of Christopher L. Sweeney Sent: Wed 5/28/2008 9:20 AM To: InterMapper Discussion Subject: Re: [IM-Talk] Nagios Plugins At 9:15 AM -0400 5/28/08, Christopher L. Sweeney wrote: >That should be all you need to do to get it running. Now, chances >are it will show as down because it's timing out--the default >timeout in InterMapper is 3 seconds, and check_ping takes quite a >bit longer to run. So, right-click on the device, choose Set >Info->Set Timeout, and configure a longer timeout. 15 seconds often >works well. > You may also need to right-click and choose Set Info->Set Thresholds and increase the thresholds for round-trip time so that you don't get a warning because of the long response time. If everything else is taken care of, and the check_ping succeeds, you should see the output from check_ping as the "Reason" in the status window. -- Christopher -- ================================================ Christopher L. Sweeney Dartware, LLC http://www.dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
<<winmail.dat>>
