Hi Dartware,
1. Automatic creation of charts while adding the device to the Intermapper. a. What are the information can be created while adding eq. CPU, Memory, Flash/Disk and Interface (bandwidth mbps, utilization %, errors/Discards on the selected interfaces) Why I need this feature? It will reduce lots of our time and manual error to create and name the charts for each device. Please assume how much difficult would be and time consuming activity needed for creating 400 more devices. 2. I need able to view and click the belonging chart's from the device icon. a. This could be possible if I do right click the device icon it should list the charts it belonging to like CPU, memory, interface and custom charts. Why I need this feature? Already we have crossed around 400 devices, viewing and finding these charts say (approx 500 device X 6 charts = 3000 charts) This also saves lots of our time. Hi All, Please share your views also. Regards Manicka Raja A Assistant Manager - Corporate IT A R I C E N T ESPEE IT Park Plot-5, Jawaharlal Nehru Salai, Ekkattuthangal, Chennai - 600 097 India Main +9 144.442.2667 7 Fax +9 144.442.2610 0 Mobile +9 199.400.1130 8 Voip +6 666.520.6677 ________________________________ "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error,please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus." ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
