Have you gotten this going yet?
Since the Fortigate can not generate the netflow data you would like,
you need something else that will. Instructions for using another
piece of software (nprobe) is here:
http://www.intermapper.com/tech-notes-intermapper-flows/201-configuring-the-nprobe-netflow-exporter
If you have a spare computer (preferably with 2 network ports), and
can configure a mirrored port on the switch going twards your
Fortigate, you should be able to set it up so Intermapper can see the
flows, and generate reports.
At 10:43 PM 7/19/2009, you wrote:
Hello,
I need help with setting up traffic monitoring for a Fortigate 60.
The Fortigate is used a firewall unit and we have had a serious
problem with traffic usage, so I would really like to use intermapper
to monitor the traffic usage to determine what is causing this problem.
The units don't support netflow or sflows so I can't user intermapper
flows.
There is an SNMP OID supplied by Fortinet to capture network traffic
but I have NO idea how to incorporate this into intermapper.
I was hoping someone has experience with setting traffic monitoring up
from a fortigate to intermapper and how they achieved it.
Thanks,
Damian Halloran
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
