Rich,
Here is a copy of the SNMP Trap viewer probe for that device. The IP
address I would like this to appear to come from is in the VarBindList
#6:
Device Status
Name: Airwave
DNS Name: (Unknown)
Address: 141.222.112.20
Status: UP
Probe: Trap Viewer (port 161 SNMPv1)
Up Time: n/a
Availability: 100 % (of 5 seconds)
Packet Loss: 0.0 % (of 0 total attempts)
Short-term Packet Loss: 0.0 % (of 0 last attempts) [Reset]
Recent Loss: None
Response time: n/a msec
Retention Policy: 24 Hours (-3), Exportable
Information about the Trap
CommunityString: **********
TimeStamp: 10
AgentAddress: 141.222.112.20
SenderAddress: 141.222.112.20
GenericTrap: <UNKNOWN> (v1 only)
SpecificTrap: <UNKNOWN> (v1 only)
Enterprise: <UNKNOWN> (v1 only)
TrapOID: AWAMP-MIB::tooManyDevAssocAp (v2c only)
SnmpVersion: 1 (0=SNMPv1; 1=SNMPv2c)
VarbindCount: 6 (total number of Varbinds)
Varbind List Items parsed by OID
TimeStamp: [N/A]
Device Status: [N/A]
Device DNS: [N/A]
Condition String: [N/A]
Trap Source Adrs: [N/A]
Probe Type: [N/A]
Varbind List Items by Position (Varbind Value / Varbind Type / Varbind
OID)
VarBindList #1: 10 / Timeticks / DISMAN-EVENT-MIB::sysUpTimeInstance
VarBindList #2: AWAMP-MIB::tooManyDevAssocAp / ObjectID /
SNMPv2-MIB::snmpTrapOID.0
VarBindList #3: 2 / Integer / AWAMP-MIB::awampEventID
VarBindList #4: 3 / Integer / AWAMP-MIB::awampEventSeverityCode
VarBindList #5: Device: Case - Skidmore Shop -
https://airwave.skidmore.edu/ap_monitoring?id=98: AP User Count User
Count >= 5 for 1 minutes / OctetString /
AWAMP-MIB::awampEventDescription
VarBindList #6: 141.222.112.102 / IPAddress / AWAMP-MIB::awampAPIP
VarBindList #7: <UNKNOWN> / <UNKNOWN> / <UNKNOWN>
VarBindList #8: <UNKNOWN> / <UNKNOWN> / <UNKNOWN>
VarBindList #9: <UNKNOWN> / <UNKNOWN> / <UNKNOWN>
VarBindList #10: <UNKNOWN> / <UNKNOWN> / <UNKNOWN>
Thanks,
- Chris Brizzell
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Richard E.
Brown
Sent: Tuesday, July 28, 2009 12:59 PM
To: [email protected]
Subject: RE: [IM-Talk] Traps
Hi Chris,
--- You wrote:
Yes - Unfortunately both IPs are that of the controlling device. The
trap sent contains the IP I want, but it is not in either the agent or
sender address.
--- end of quote ---
That's odd... Would you send along the contents of the Status Window?
(Tip: right-click
in the status window and choose Copy all... to paste into a message.)
Feel free to obscure any private information/addresses/etc.
Rich
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
