Hi,
That is not possible as far as I know.
One major reason: Imagine if you loose connection to a huge part of your
monitored devices.. what a flood of polls you would see, and that might further
bring down your devices.. !?!
If you are not cool with the interval, then why don't you poll with the normal
30 sec. interval?
--
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
AIM: Marook
Phone: +45 30787715
On 28/12/2009, at 04.55, LP wrote:
>
> Is there a way to set the parameters so that if a device has failed, it will
> continue to try getting to the device at an accelerated rate? That way, if
> an snmp device is said to be down, I don't have to wait for up to 3-5 min for
> it to be reported as up again? Same for pings- if it looses 3 pings, have it
> start pinging every 10secs until the device is responds for so many pings
> then reported as ok again and therefore returning to it's normal polling
> interval. (Much like the features in IP Monitor).
>
> How can we do this, or something similar, in InterMapper?
>
> Thanks all!
>
>
> -------------------- m2f --------------------
>
> Read this topic online here:
> http://forums.dartware.com/viewtopic.php?p=2082#2082
>
>
>
>
>
> ____________________________________________________________________
> List archives:
> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
> To unsubscribe: send email to: [email protected]
>
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
