On 12/27/2009 10:55 PM, LP wrote:
Is there a way to set the parameters so that if a device has failed, it will
continue to try getting to the device at an accelerated rate? That way, if an
snmp device is said to be down, I don't have to wait for up to 3-5 min for it
to be reported as up again? Same for pings- if it looses 3 pings, have it
start pinging every 10secs until the device is responds for so many pings then
reported as ok again and therefore returning to it's normal polling interval.
(Much like the features in IP Monitor).
How can we do this, or something similar, in InterMapper?
Thanks all!
Hello,
It isn't possible to change the poll interval automatically based on the
status of the device. I would be happy to submit this as an enhancement
request for you, if you would provide your name and the account you are
associated with.
Thanks!
--
Best regards,
Janice Losgar
Dartware, LLC
603)643-9600 x114
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
