Probe group is not following my perception of intuitive. I created a probe group 'looking' at a Cisco 3745. I had several probes in the group e.g., basic oid, snmp traffic, and process. This was done by adding three devices, setting up probes and then group.
The probe worked perfectly. All the serial links and LAN links showed as expected, green icon. I then opened the group probe and selected '+'. I added the basic oid probe again within the group. Now I get a no SNMP response error code for this new probe only. I tried a different probe using the same procedure. Same error. Why does this happen? It also looks like the 3745 does not respond to 'high traffic probe' but does correctly process the standard snmp traffic probe. One other symptom, I deleted the new probe from within the group. The deleted probe was removed from the group and now shows as a new device on the map. The new device also shows up in error: 'no SNMP response'. Confusing. Curious if all this is simply due to the 3745 or the user. -- Paul ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
