I did check that too. This particular 3745 is doing other strange things including only displaying the serial interface links with SNMP traffic probe. Using the basic oid, I see Ethernet ports only. Cisco IOS 12.2. It may be hardware since other 3745 using same IOS work fine.
I am only really writing here to discover if I missed something re IM. It starting to look like it is not an issue with IM. The comm string different is a good thought but throughly checked. -- Paul On May 10, 2010, at 9:29 PM, Christopher Sweeney wrote: > On 5/10/10 7:58 PM, Paul M. Hill wrote: >> I added the basic oid probe again within the group. Now I get a no SNMP >> response error code for this new probe only. I tried a different probe using >> the same procedure. Same error. > > So the group includes a different instance of the Basic OID probe, an > SNMP Traffic probe, and a process-and-memory probe, all of which are > receiving an SNMP response, but the most-recently-added Basic OID probe > is not? > > As you found out when you removed it from the group, this doesn't have > much to do with it being in the group. > > The first question that comes to mind is whether the read-only community > string for the Cisco 3745 is something other than "public" and was set > correctly for the working probes but not for the ones reporting no response? > > -- Christopher > > -- > ================================= > Christopher L. Sweeney > Director of Software Development > Dartware, LLC > +1 603 643-9600 x104 > http://dartware.com/ > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
