Can anyone explain this one? It's been driving me nuts all day...
>From my InterMapper server, I can perform the following snmpget:
[dstempien@intermapper ~]$ snmpget -v1 -c <removed> ax-faxgw01-ag
1.3.6.1.4.1.9.10.19.1.1.9.1.4.0.0
SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.0 = Counter32: 7
If I use the snmpwalk utility in IM remote, I get the following:
1.3.6.1.4.1.9.10.19.1.1.9.1.4.0.0 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.0
Counter 7
1.3.6.1.4.1.9.10.19.1.1.9.1.4.0.1 SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.1
Counter 0
So far, so good -- it's returning a value of 7. Yet, if I setup a Single OID
Viewer or Basic OID probe with that same OID, I get a return value of 0. To
wit:
Device Status
Name: ax-faxgw01-ag
DNS Name: ax-faxgw01-ag
Address: 172.17.1.89
Status: UP
Probe: SNMP - Single OID Viewer (port 161 SNMPv2c)
Up Time: n/a
Availability: 100 % (of 5 minutes, 34 seconds)
Packet Loss: 0.0 % (of 12 total attempts)
Short-term Packet Loss: 0.0 % (of 12 last attempts) [Reset]
Recent Loss: None
Response time: 0 msec
SNMPv2-SMI::enterprises.9.10.19.1.1.9.1.4.0.0: 0
Last updated Mar 03, 14:22:16; interval: 30 seconds
Am I doing something wrong?
Thanks,
--
Dave Stempien
University of Rochester Medical Center
Information Systems Division
(585) 784-2427
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
