On Mar 3, 2011, at 2:34 PM, William Fisher wrote: So far, so good -- it's returning a value of 7. Yet, if I setup a Single OID Viewer or Basic OID probe with that same OID, I get a return value of 0. To wit:
If the probe is using the DEFAULT type for the OID, it will be converting the Counter32 into rate/second. The rate of change is 0. The snmpget and snmpwalk commands show the raw value of the Counter32. If you set the type of the OID to TOTAL-VALUE, you should see the same value in the probe that you saw from snmpget/snmpwalk. -- Bill Fisher Dartware, LLC ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]<mailto:[email protected]> Okay, that makes sense. Call me a dolt, but can I specify the OID type in the built-in Single OID Viewer or Basic OID probe, or will I have to write up a custom probe? ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
