The max larb number that a iommu HW support is 8(larb0~larb7 in the below diagram). If the larb's number is over 8, we use a sub_common for merging several larbs into one larb. At this case, we will extend larb_id: bit[11:9] means common-id; bit[8:7] means subcommon-id; >From these two variables, we could get the real larb number when translation fault happen. The diagram is as below: EMI | IOMMU | ----------------- | | common1 common0 | | ----------------- | smi common | ------------------------------------ | | | | | | 3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8) | | | | | | Larb0 Larb1 | Larb3 ... Larb7 | smi sub common | -------------------------- | | | | 2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4) | | | | Larb8 Larb9 Larb10 Larb11
In this patch we extend larb_remap[] to larb_remap[8][4] for this. larb_remap[x][y]: x means common-id above, y means subcommon_id above. We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM macro. Cc: Matthias Brugger <matthias....@gmail.com> Signed-off-by: Chao Hao <chao....@mediatek.com> Reviewed-by: Yong Wu <yong...@mediatek.com> --- drivers/iommu/mtk_iommu.c | 20 +++++++++++++------- drivers/iommu/mtk_iommu.h | 3 ++- include/soc/mediatek/smi.h | 2 ++ 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index 116418cc1cf8..ec1f86913739 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -91,6 +91,8 @@ #define REG_MMU1_INVLD_PA 0x148 #define REG_MMU0_INT_ID 0x150 #define REG_MMU1_INT_ID 0x154 +#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7) +#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3) #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7) #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f) @@ -229,7 +231,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) struct mtk_iommu_data *data = dev_id; struct mtk_iommu_domain *dom = data->m4u_dom; u32 int_state, regval, fault_iova, fault_pa; - unsigned int fault_larb, fault_port; + unsigned int fault_larb, fault_port, sub_comm = 0; bool layer, write; /* Read error info from registers */ @@ -245,10 +247,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) } layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT; write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; - fault_larb = F_MMU_INT_ID_LARB_ID(regval); fault_port = F_MMU_INT_ID_PORT_ID(regval); - - fault_larb = data->plat_data->larbid_remap[fault_larb]; + if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) { + fault_larb = F_MMU_INT_ID_COMM_ID(regval); + sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval); + } else { + fault_larb = F_MMU_INT_ID_LARB_ID(regval); + } + fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm]; if (report_iommu_fault(&dom->domain, data->dev, fault_iova, write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) { @@ -778,7 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = { HAS_BCLK | HAS_VLD_PA_RNG, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}}, }; static const struct mtk_iommu_plat_data mt8173_data = { @@ -787,14 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = { HAS_BCLK | RESET_AXI, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */ + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */ }; static const struct mtk_iommu_plat_data mt8183_data = { .m4u_plat = M4U_MT8183, .flags = RESET_AXI, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1}, + .larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}}, }; static const struct of_device_id mtk_iommu_of_ids[] = { diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h index ae70296af2b4..be6d32ee5bda 100644 --- a/drivers/iommu/mtk_iommu.h +++ b/drivers/iommu/mtk_iommu.h @@ -23,6 +23,7 @@ #define HAS_VLD_PA_RNG BIT(2) #define RESET_AXI BIT(3) #define OUT_ORDER_EN BIT(4) +#define HAS_SUB_COMM BIT(5) #define MTK_IOMMU_HAS_FLAG(pdata, _x) \ ((((pdata)->flags) & (_x)) == (_x)) @@ -48,7 +49,7 @@ struct mtk_iommu_plat_data { enum mtk_iommu_plat m4u_plat; u32 flags; u32 inv_sel_reg; - unsigned char larbid_remap[MTK_LARB_NR_MAX]; + unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX]; }; struct mtk_iommu_domain; diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h index 5a34b87d89e3..fa65a55468e2 100644 --- a/include/soc/mediatek/smi.h +++ b/include/soc/mediatek/smi.h @@ -12,6 +12,8 @@ #ifdef CONFIG_MTK_SMI #define MTK_LARB_NR_MAX 16 +#define MTK_LARB_COM_MAX 8 +#define MTK_LARB_SUBCOM_MAX 4 #define MTK_SMI_MMU_EN(port) BIT(port) -- 2.18.0 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu