On Tue, 2020-06-30 at 18:55 +0800, Yong Wu wrote:
> On Mon, 2020-06-29 at 15:13 +0800, Chao Hao wrote:
> > The max larb number that a iommu HW support is 8(larb0~larb7 in the below
> > diagram).
> > If the larb's number is over 8, we use a sub_common for merging
> > several larbs into one larb. At this case, we will extend larb_id:
> > bit[11:9] means common-id;
> > bit[8:7] means subcommon-id;
> > From these two variables, we could get the real larb number when
> > translation fault happen.
> > The diagram is as below:
> > EMI
> > |
> > IOMMU
> > |
> > -----------------
> > | |
> > common1 common0
> > | |
> > -----------------
> > |
> > smi common
> > |
> > ------------------------------------
> > | | | | | |
> > 3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8)
> > | | | | | |
> > Larb0 Larb1 | Larb3 ... Larb7
> > |
> > smi sub common
> > |
> > --------------------------
> > | | | |
> > 2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4)
> > | | | |
> > Larb8 Larb9 Larb10 Larb11
> >
> > In this patch we extend larb_remap[] to larb_remap[8][4] for this.
> > larb_remap[x][y]: x means common-id above, y means subcommon_id above.
> >
> > We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM
> > macro.
> >
> > Cc: Matthias Brugger <matthias....@gmail.com>
> > Signed-off-by: Chao Hao <chao....@mediatek.com>
> > Reviewed-by: Yong Wu <yong...@mediatek.com>
> > ---
> > drivers/iommu/mtk_iommu.c | 20 +++++++++++++-------
> > drivers/iommu/mtk_iommu.h | 3 ++-
> > include/soc/mediatek/smi.h | 2 ++
> > 3 files changed, 17 insertions(+), 8 deletions(-)
>
> [snip]
>
> > @@ -48,7 +49,7 @@ struct mtk_iommu_plat_data {
> > enum mtk_iommu_plat m4u_plat;
> > u32 flags;
> > u32 inv_sel_reg;
> > - unsigned char larbid_remap[MTK_LARB_NR_MAX];
> > + unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
> > };
> >
> > struct mtk_iommu_domain;
> > diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
> > index 5a34b87d89e3..fa65a55468e2 100644
> > --- a/include/soc/mediatek/smi.h
> > +++ b/include/soc/mediatek/smi.h
> > @@ -12,6 +12,8 @@
> > #ifdef CONFIG_MTK_SMI
> >
> > #define MTK_LARB_NR_MAX 16
> > +#define MTK_LARB_COM_MAX 8
> > +#define MTK_LARB_SUBCOM_MAX 4
>
> Both are only used in mtk_iommu.h, and I don't think smi has plan to use
> them. thus we could move them into mtk_iommu.h
>
ok, got it. Thanks for your advice.
> >
> > #define MTK_SMI_MMU_EN(port) BIT(port)
> >
>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
