With configuration below :
# ipfstat -hion
60 @1 pass out from any to any
63 @1 pass in from any to any
# ipnat -l
List of active MAP/Redirect filters:
bimap xl1 192.168.1.2/32 -> 202.195.139.231/32
map xl1 0.0.0.0/0 -> 0.0.0.0/32 proxy port ftp ftp/tcp
map xl1 from 172.16.1.0/24 to any -> 202.195.139.238/32
When I trace from my PC with IP address '172.16.1.90' to my server with
static map the reply is like this :
C:\WINDOWS\Desktop>tracert -d 202.195.139.231
Tracing route to 202.195.139.231 over a maximum of 30 hops
1 1 ms <10 ms 1 ms 172.16.1.1
2 4 ms 6 ms 5 ms 202.195.142.241
3 7 ms 8 ms 7 ms 202.195.139.231
4 8 ms 8 ms 8 ms 202.195.139.231
Trace complete.
My question is ?
Why my WAN IP is not listed here ?
Usualy on a router it should reach '202.195.142.242' first and then the
server IP address '202.129.139.231'. Can it be like this ?
My box is configured like this :
192.168.1.1/24
-----------------------
|
202.195.142.242/30|---------------|
------------------| ipf+ipnat |
|---------------|
|
-----------------------
172.16.1.1/24