Sorry if I miss understanding, If I trace from other machine outside my network ex visualroute it's stil like this oltogh with more hope.
Sorry Darren if you say how it's works can it change to be like what I want ? ----- Original Message ----- From: "Phil Dibowitz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 06, 2002 4:52 AM Subject: Re: IP Firewall on trace gone > Angka H. K. wrote: > > > With configuration below : > > > > > > # ipfstat -hion > > 60 @1 pass out from any to any > > 63 @1 pass in from any to any > > > > # ipnat -l > > List of active MAP/Redirect filters: > > bimap xl1 192.168.1.2/32 -> 202.195.139.231/32 > > map xl1 0.0.0.0/0 -> 0.0.0.0/32 proxy port ftp ftp/tcp > > map xl1 from 172.16.1.0/24 to any -> 202.195.139.238/32 > > > > > > When I trace from my PC with IP address '172.16.1.90' to my server with > > static map the reply is like this : > > > > > > C:\WINDOWS\Desktop>tracert -d 202.195.139.231 > > > > Tracing route to 202.195.139.231 over a maximum of 30 hops > > > > 1 1 ms <10 ms 1 ms 172.16.1.1 > > 2 4 ms 6 ms 5 ms 202.195.142.241 > > 3 7 ms 8 ms 7 ms 202.195.139.231 > > 4 8 ms 8 ms 8 ms 202.195.139.231 > > > > Trace complete. > > > > > > My question is ? > > > > Why my WAN IP is not listed here ? > > > Because the LAN IP is there. =) It never contacts the extranal interface > directly, it contacts the firewall via it's internal interface. The firewall > then sends the packet out it's external interface to the next hop... > > Phil > -- > "They that can give up essential liberty to obtain a little temporary safety > deserve neither liberty nor safety." > -Benjamin Franklin, 1759 > > >
