On Sat, Jun 18, 2016 at 08:47:30AM +0200, Geert Stappers wrote: > On Fri, Jun 17, 2016 at 06:46:50PM +0000, Prout, Ryan C. wrote: > > Hello, > > > > > > I am trying to get iPXE to work with a myricom NIC using this driver > > myri10ge and this server HP Proliant DL360 G6. I have successfully used > > my iPXE build on another machine but this one keeps giving me issues. > > > > > > I have set the IP, gateway, DNS and confirmed that the proper MAC addrss > > is on net0. The net0 interface comes up and has a link but I am unable > > to ping anything. I get an error pointing me here ipxe.org/3c0860. > > > > At http://www.ipxe.org/err/3c0860 is the text > > | Possible sources > | > | This error originated from one of the following locations > | within the iPXE source code: > | > | net/netdevice.c (line 1027) > | net/netdevice.c (line 1193) > > > The source code line with some context > > 1024 DBGC ( netdev, "NETDEV %s unknown network protocol %04x\n", > 1025 netdev->name, ntohs ( net_proto ) ); > 1026 free_iob ( iobuf ); > 1027 return -ENOTSUP; > > > 1190 if ( ! netdev_configurator_applies ( netdev, configurator ) ) { > 1191 DBGC ( netdev, "NETDEV %s does not support configuration > via " > 1192 "%s\n", netdev->name, configurator->name ); > 1193 return -ENOTSUP; > 1194 } >
Also from http://www.ipxe.org/err/3c0860 | Additional notes | | (Please edit this page to include any of your own useful hints and tips | for fixing this error.) | | This error indicates that a packet was received for an unsupported | network-layer protocol. This error is generally harmless. For example, | received IPv6 packets may trigger this error, if your build of iPXE is | compiled without IPv6 support. > > As I proceed to troublshoot, I wanted to take a minute to reach out > > and see if you guys had any insight. > > Nope, I don't have that insight. iPXE is fairly new to me. > > This e-mail is to change the subject of this thread from > a very generic 'iPXE issues' to 'iPXE issues, myri10ge 3c0860' > > The expansion of error code 3c0860 is done above. > > Hopefully will this thread get a follow-up on the myri10ge part. > Now that I have seen the additional notes, I revoke my hint towards the myri10ge driver. Still looking forward to a follow-up on the thread, such as a simple "with including FOO support is the 3c0860 gone". Groeten Geert Stappers -- Leven en laten leven _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel