Hi,
I have intel pci card with following info:
Shell> pci
Seg Bus Dev Func
--- --- --- ----
00 00 00 00 ==> Bridge Device - PCI/PCI bridge
Vendor 1957 Device 8240 Prog Interface 0
00 01 00 00 ==> Network Controller - Ethernet controller
Vendor 8086 Device 10D3 Prog Interface 0
PCI Command Register = 7
PCI Status Register = 10
PCI VendorID = 8086
PCI DeviceID = 10D3
PCI SubVendorID = 8086
PCI SubSystemID = A01F
PCI Segment = 0
PCI Bus = 1
Please tell how can I add support for this PCI card.
Thanks,
Meenakshi
-----Original Message-----
From: Michael Brown [mailto:[email protected]]
Sent: Tuesday, April 18, 2017 3:59 PM
To: Meenakshi Aggarwal <[email protected]>; Andreas Fink
<[email protected]>
Cc: [email protected]
Subject: Re: [ipxe-devel] IPXE compilation error with arm64
On 18/04/17 10:51, Meenakshi Aggarwal wrote:
> Thanks for your reply.
>
> We have an armv8 based Soc and want to build an efi application of ipxe which
> I can execute from UEFI shell.
>
> Can I use 8086100e.efi with my Soc?
> Or is it specific to some particular vendor?
That build is for PCI ID 8086:100e (which is an Intel NIC). Which network
hardware is present on your ARMv8 SoC?
Michael
_______________________________________________
ipxe-devel mailing list
[email protected]
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
