Hi, Any suggestion will be of great help.
Regards, Meenakshi -----Original Message----- From: Meenakshi Aggarwal Sent: Wednesday, April 19, 2017 10:50 AM To: 'Michael Brown' <[email protected]>; Andreas Fink <[email protected]> Cc: [email protected] Subject: RE: [ipxe-devel] IPXE compilation error with arm64 Hi Michael, It might be possible that I am doing something wrong, I am using following steps to launch iPXE: Shell> fs0: FS0:\> 808610d3.efi iPXE initialising devices...ok iPXE 1.0.0+ (2d79) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP iSCSI TFTP AoE EFI Menu iPXE> ifstat iPXE> dhcp iPXE> ifstat iPXE> config .................. reverse-usernam <not specified> buildarch...... arm64 dhcp-server.... <not specified> errno.......... 0x2c1de087 platform....... efi priority....... <not specified> scriptlet...... <not specified> unixtime....... 0x58f6f45e version........ 1.0.0+ (2d79) ................ Ifstat command is not showing any detected interface. Here errno.......... 0x2c1de087 is coming . Please help me with what I am missing> Thanks, Meenakshi -----Original Message----- From: Michael Brown [mailto:[email protected]] Sent: Tuesday, April 18, 2017 4:53 PM To: Meenakshi Aggarwal <[email protected]>; Andreas Fink <[email protected]> Cc: [email protected] Subject: Re: [ipxe-devel] IPXE compilation error with arm64 On 18/04/17 12:20, Meenakshi Aggarwal wrote: > None of these commands work from iPXE shell: > Ifstat, dhcp, route etc You are almost certainly doing something wrong. You need to give more information so that we can work out what it is. Saying "it does not work" does not help. Michael _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
