On Thu, Jul 27, 2017 at 1:31 PM, Lonnie Cumberland <lon...@outstep.com> wrote: > Greetings, > > I hope that you can help as I have a very quick and newbie iPXE question. > > I am developing a system that allows for booting some CoreOS nodes for a > clustering project that I have going now but need, I would guess to be a > special iPXE iso for the booting. > > What I would like is to be able to boot with the iPXE.iso such that it will > call a specific boot URL such as "boot.example.net" which will then > re-direct the caller to the "bootcfg.example.net" for the configuration > stuff. > > In the case that I need, I know where I have the dnsmasq set up on an > Internet VPS host and also where the TFTP server is located, but need to > either build an ipxe.iso that can just be put into bare-metal and vps > machines that will automatically call the dnsmasq server that I have online, > or figure out how to tell iPXE, when booted to look for the dnsmasq server > at the boot.example.net URL and I do not know how to do this with iPXE so I > am hoping that someone would be so kind as to help guide me on this? > > Any help or guidance would be greatly appreciated. > > Have a great day, > Lonnie > > _______________________________________________ > ipxe-devel mailing list > ipxe-devel@lists.ipxe.org > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel >
Why do you want to boot from an ISO instead of chain loading iPXE from PXE ? You might take a look at the embed options http://ipxe.org/embed Cheers _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel