Charlie, That is my complaint with the R8 too. If the signal next door is too strong, then the noise blanker shuts off. The SPR4 does not have that issue. However, in the case of the SPR4, often if the clicking of the fence to loud enough, the blanker will not totally remove the noise 100%. The R8, that is not the issue. The way around the issue with the noise blanker in the R8, is to either phase down the strong signal, or use the Palstar presellector, between the antenna and R8. The "Q" is so sharp that it knocks down a signal 10 KHZ away 20 DB and enough to keep the noise blanker in the R8 working. But I still have an issue with splits really close. But most of the time, knocking down the RF gain in ECSS, I can rid myself of 99% of the clicking. But it is fuzzy to do sometimes. But at least in the case of the clicking fence, it is much easier to get rid of that noise than computers, and other noises.
73, Patrick Patrick Martin KAVT Reception Manager _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com