This unit, the AC cord goes directly into the modem box. There is no wall wart. But shielding the box with till foil makes a huge difference. Patrick Patrick Martin Seaside OR KGED QSL Manager
> From: lfra...@cebridge.net > To: irca@hard-core-dx.com > Date: Thu, 17 Oct 2013 12:56:54 -0400 > Subject: Re: [IRCA] Cable Routers OT > > The noise could also becoming from the power supply for the modem. > Especially if it is a switching type wall wart. The power cable can be > acting as a transmit antenna and also injecting the noise signal into the > modem itself. > > Larry K8YYY > > Once upon a time it was earlier - > > Shinnston, Northern Territories > Harrison County, West Virginia > > _______________________________________________ > IRCA mailing list > IRCA@hard-core-dx.com > http://montreal.kotalampi.com/mailman/listinfo/irca > > Opinions expressed in messages on this mailing list are those of the original > contributors and do not necessarily reflect the opinion of the IRCA, its > editors, publishing staff, or officers > > For more information: http://www.ircaonline.org > > To Post a message: irca@hard-core-dx.com > _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com
