----- Original Message ----- From: "ExtremeOxigen" <[EMAIL PROTECTED]> To: <ITCENTER@yahoogroups.com> Sent: Wednesday, December 22, 2004 4:02 PM Subject: [ITCENTER] 16 bit MS-DOS Subsystem
> Dear Rekan-rekan, > Saya punya masalah kalau masuk ke dos prompt,padahal pagi > tadi masih OK. > > Kalau saya mau membuka edit.exe (text editor) atau program apa > saja yang berbasis dos prompt selalu muncul kotak warning sebagai > berikut : > > 16 bit MS-DOS Subsystem > command prompt - edit > c:\windows\system32\autoexec.nt. the system file is not suitable for > running MS-DOS and microsoft windows applications. choose 'close; > to terminate the application. > ada tombol pilihan close dan ignore. > > OS yang saya pakai : WinXP service pack 2 > saya coba mencari c:\windows\system32\autoexec.nt , tapi tidak ketemu. > > Mohon pencerahannya,kalau ada rekan yang pernah mengalami hal serupa. > > Salam, > Yonson Coba buat file autoexec.net (menggunakan notepad saja), dan copy paste kan informasi di bawah ini. Save file autoexec.net tadi di folder c:\windows\system32 dan coba menjalankan program "dos" lagi, apa masih ada error seperti di atas? Isi file autoexec.nt ini diambil dari file yang ada di Windows XP komputer saya. Maaf kalau belum banyak membantu. Budhi S. ====================== @echo off REM AUTOEXEC.BAT is not used to initialize the MS-DOS environment. REM AUTOEXEC.NT is used to initialize the MS-DOS environment unless a REM different startup file is specified in an application's PIF. REM Install CD ROM extensions lh %SystemRoot%\system32\mscdexnt.exe REM Install network redirector (load before dosx.exe) lh %SystemRoot%\system32\redir REM Install DPMI support lh %SystemRoot%\system32\dosx REM The following line enables Sound Blaster 2.0 support on NTVDM. REM The command for setting the BLASTER environment is as follows: REM SET BLASTER=A220 I5 D1 P330 REM where: REM A specifies the sound blaster's base I/O port REM I specifies the interrupt request line REM D specifies the 8-bit DMA channel REM P specifies the MPU-401 base I/O port REM T specifies the type of sound blaster card REM 1 - Sound Blaster 1.5 REM 2 - Sound Blaster Pro I REM 3 - Sound Blaster 2.0 REM 4 - Sound Blaster Pro II REM 6 - SOund Blaster 16/AWE 32/32/64 REM REM The default value is A220 I5 D1 T3 and P330. If any of the switches is REM left unspecified, the default value will be used. (NOTE, since all the REM ports are virtualized, the information provided here does not have to REM match the real hardware setting.) NTVDM supports Sound Blaster 2.0 only. REM The T switch must be set to 3, if specified. SET BLASTER=A220 I5 D1 P330 T3 REM To disable the sound blaster 2.0 support on NTVDM, specify an invalid REM SB base I/O port address. For example: REM SET BLASTER=A0 -- www.ITCENTER.or.id - Komunitas Teknologi Informasi Indonesia Info, Gabung, Keluar, Mode Kirim : [EMAIL PROTECTED] ::: Hapus bagian yang tidak perlu (footer, dst) saat reply! ::: ## Forum: ITCENTER.or.id/forum ## Jobs: ITCENTER.or.id/jobs ## Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ITCENTER/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/