di vmwarenya pak. bagian virtual network.
sy kutip dari helpnya : DHCP Tab Choose: Edit > Virtual Network Settings > DHCP You need to configure the virtual DHCP server if you want to assign IP addresses to each virtual machine and the host on the private network (that is, if you want to use host-only or NAT networking). Using DHCP to assign IP addresses is simpler and more automatic than statically assigning them. To add a new virtual network to the list, click Add. In the dialog box that appears, choose the network you want to add from the drop-down list, and click OK. (At this point, you cannot change any of the other settings in the DHCP Settings dialog box.) On the DHCP tab, click Apply to activate the new network. You can now select the newly added network and change the settings, as follows. To change DHCP settings for a virtual network, select it in the list, and click Properties. In the DHCP Settings dialog box that appears, you can change the range of IP addresses provided by the Workstation DHCP server on a particular virtual network. You can also change the duration of DHCP leases provided to clients on the virtual network. (If you want to change the subnet settings, you need to use the Host Virtual network Mapping tab.) You can completely stop the DHCP service for all virtual networks by clicking Stop, and then clicking Apply. If the service is stopped, you can start it by clicking Start and then Apply. (You can also modify DHCP settings by choosing Edit > Virtual Network Settings > Host Virtual Network Mapping, selecting a specific bridged adapter, then clicking the > button for that virtual network.) 2011/4/13 Stephanus <steph...@gmail.com> > Maksudnya di Windows Server 2008nya ada fasilitas DHCP x ya Pak ? > Kalau di VMwarenya saya pakai OS yang lain tidak ada masalah. > Dan hanya terjadi kalau memakai media Wirless, saya ganti pakai kabel > tidak masalah > > Budiman A wrote: > > > > Pak Steph, > > > > di VMWARE ada fasilitas virtual Network card, salah satu featurenya > adalah > > dhcp. > > kemungkinan besar dhcp segmentnya sama antara di vmware & di network > > fisik. > > > > On Wed, Apr 6, 2011 at 10:18 AM, Stephanus Kusdibyo > > <steph...@gmail.com <mailto:stephjkt%40gmail.com>>wrote: > > > > > Dear all,.. > > > > > > Saya lagi coba install windows server 2008 R2 di VMware untuk trial > > > software > > > Kenapa ya IPnya selalu conflict, saya kasih DHCP maupun static sama > saja > > > Di Network tidak ada yang pakai IP itu, adakah yang harus saya set di > > > Windows 2008 Servernya ? terimakasih > > > > > > Regards, > > > Steph > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > -- > www.itcenter.or.id - Komunitas Teknologi Informasi Indonesia > Gabung, Keluar, Mode Kirim : itcenter-h...@yahoogroups.com > > Yahoo! Groups Links > > > > -- rgds, Budiman [Non-text portions of this message have been removed] ------------------------------------ -- www.itcenter.or.id - Komunitas Teknologi Informasi Indonesia Gabung, Keluar, Mode Kirim : itcenter-h...@yahoogroups.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ITCENTER/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ITCENTER/join (Yahoo! ID required) <*> To change settings via email: itcenter-dig...@yahoogroups.com itcenter-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: itcenter-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
