I believe he mentions below that he's running 2.0, NOT 3.0.
Adam
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Rusty Lynch
Sent: Thursday, September 05, 2013 8:58 AM
To: Clark, Joel
Cc: IVI Tizen
Subject: Re: egalax touch screen not detected by X
Actually... that fix only applies when you are using wayland.
I'm not sure if you were using a touchscreen with the same issue, but we hit an
issue when a vendor wired up an old style single point resistive screen on top
of an egalax touchscreen controller, where weston didn't recognize the device
as touch (since it didn't support the modern multipoint protocol), and treated
it as a mouse, but then the device would emit TOUCH_BTN instead of a left or
right mouse button.
So... it actually worked, but no software is listening for this little known
button value so kind of pointless.
--rusty
On Thu, 2013-09-05 at 14:21 +0000, Clark, Joel wrote:
> This has been fixed in Tizen IVI 3.0
> https://bugs.tizen.org/jira/i#browse/TIVI-1086
>
>
>
> You might want to look at these patches:
>
> https://bugs.freedesktop.org/show_bug.cgi?id=54428
>
>
>
> https://review.tizen.org/gerrit/#/c/6047/
>
>
>
> with the fix the touchscreen is no longer recognized as a mouse
> device.
>
>
>
> Regards
>
> Joel
>
>
>
>
>
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Prabhuram Murugan
> Sent: Thursday, September 05, 2013 5:38 AM
> To: IVI Tizen
> Subject: egalax touch screen not detected by X
>
>
>
> Hi ,
>
>
> I am using a USB based touch screen LCD for TIZEN on NDiS 166 board.
>
>
> But the touch input is not working with this board.
> I came across many bugs raised in TIZEN bug site, but they are mostly
> for touch calibration.
>
>
> In my case the touch screen is detected by the kernel but "xinput
> list" doesnt list my touch screen device at all. Below are dmesg and
> xinput list logs ....
>
>
> I am using TIZEN 2.0 release.
>
>
>
>
>
> DMESG
>
>
> [ 12.703678] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 21.528514] composite sync not supported
> [ 884.484925] usb 2-1.1: USB disconnect, device number 3 [
> 885.940235] usb 2-1.1: new low-speed USB device number 7 using
> ehci-pci [ 886.020179] usb 2-1.1: New USB device found,
> idVendor=0eef,
> idProduct=0001
> [ 886.020184] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 886.020188] usb 2-1.1: Product: USB TouchController [ 886.020191]
> usb 2-1.1: Manufacturer: eGalax Inc.
> [ 886.022735] input: eGalax Inc. USB TouchController as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
>
> -sh-4.1# xinput list
> ⎡ Virtual core pointer id=2 [master pointer
> (3)]
> ⎜ ↳ Virtual core XTEST pointer id=4 [slave
> pointer (2)]
> ⎜ ↳ SEJIN SEJIN USB Mini Trackball Keyboard id=11 [slave
> pointer (2)]
> ⎣ Virtual core keyboard id=3 [master keyboard
> (2)]
> ↳ Virtual core XTEST keyboard id=5 [slave
> keyboard (3)]
> ↳ SEJIN SEJIN USB Mini Trackball Keyboard id=10 [slave
> keyboard (3)]
> ∼ Power Button id=6 [floating slave]
> ∼ Video Bus id=7 [floating slave]
> ∼ Power Button id=8 [floating slave]
> ∼ Microsoft LifeCam VX-800 id=9 [floating slave]
>
> #cat /dev/input/mouse1
>
> )9
>
>
>
>
> Thanks and Regards,
> Prabhuram M
>
>
> _______________________________________________
> IVI mailing list
> [email protected]
> https://lists.tizen.org/listinfo/ivi
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
