Hi, First, is there an official mailing list for AMB? I'll post suceeding questions on there.
Anyway, I was able to connect with Scantool OBDLink and I need help on the the log below. 1.) what is the meaning of * 382512550.73074 | obd2source.cpp : 158 Got single shot request: 010D1 : VehicleSpeed * is 010D1 means a value for a vehicles speed? My car is on a partk mode but engine is running. 2) What's the meaning of '(1)' in the ERROR log below. 1382512550.71717 | Loading config file: /etc/ambd/config 1382512550.7175 | No mainloop specified in config. Using glib by default. 1382512550.71755 | plugin config key: name value: OBD2Source 1382512550.71759 | plugin config key: path value: /usr/local/lib/automotive-message-broker/obd2sourceplugin.so 1382512550.71762 | plugin config key: device value: /dev/ttyUSB0 1382512550.71765 | plugin config key: baud value: 9600 1382512550.71768 | plugin config key: bluetoothAdapter value: 1382512550.71771 | Loading plugin: /usr/local/lib/automotive-message-broker/obd2sourceplugin.so 1382512550.71951 | setSupported () adding support for property VehicleSpeed 1382512550.71957 | setSupported () adding support for property EngineSpeed 1382512550.71959 | setSupported () adding support for property MassAirFlow 1382512550.71962 | setSupported () adding support for property VIN 1382512550.71964 | setSupported () adding support for property WMI 1382512550.71967 | setSupported () adding support for property EngineCoolantTemperature 1382512550.71969 | setSupported () adding support for property AirIntakeTemperature 1382512550.71972 | setSupported () adding support for property EngineLoad 1382512550.71974 | setSupported () adding support for property ThrottlePosition 1382512550.71977 | setSupported () adding support for property BatteryVoltage 1382512550.71979 | setSupported () adding support for property Obd2Connected 1382512550.71989 | obd2source.cpp : 541 Incoming setting: baud : 9600 1382512550.71995 | obd2source.cpp : 541 Incoming setting: bluetoothAdapter : 1382512550.71998 | obd2source.cpp : 541 Incoming setting: device : /dev/ttyUSB0 1382512550.72002 | obd2source.cpp : 541 Incoming setting: name : OBD2Source 1382512550.72005 | obd2source.cpp : 541 Incoming setting: path : /usr/local/lib/automotive-message-broker/obd2sourceplugin.so 1382512550.72031 | Trying to free obj 1382512550.72035 | Done first 1382512550.72038 | plugin config key: name value: ExampleSink 1382512550.72041 | plugin config key: path value: /usr/local/lib/automotive-message-broker/examplesinkplugin.so 1382512550.72044 | Loading plugin: /usr/local/lib/automotive-message-broker/examplesinkplugin.so 1382512550.72053 | obd2source.cpp : 176 Command: setportandbaud 1382512550.72061 | Subscribing to: EngineSpeed 1382512550.72065 | Subscribing to: VehicleSpeed 1382512550.72067 | Subscribing to: Latitude 1382512550.72069 | Subscribing to: Longitude 1382512550.72071 | Support changed! 1382512550.72075 | obd2source.cpp : 716 getPropertyAsync requested for VehicleSpeed 1382512550.72081 | obd2source.cpp : 716 getPropertyAsync requested for VIN 1382512550.72085 | obd2source.cpp : 716 getPropertyAsync requested for WMI 1382512550.72088 | obd2source.cpp : 716 getPropertyAsync requested for BatteryVoltage 1382512550.72091 | Trying to free obj 1382512550.72092 | Done 1382512550.73074 | obd2source.cpp : 158 Got single shot request: 010D1 : VehicleSpeed 1382512550.73084 | obd2source.cpp : 176 Command: connectifnot 1382512550.73087 | Obd2Source::Connect() /dev/ttyUSB0 9600 1382512550.73093 | Attempting to open com port /dev/ttyUSB0 1382512550.73225 | Com Port Opened 5 1382512550.73233 | Setting baud rate to 9600 on port /dev/ttyUSB0 1382512560.72105 | ERROR Velocity Async request failed ( 1 ) 1382512560.72119 | ERROR VIN Async request failed ( 1 ) 1382512560.72126 | ERROR WMI Async request failed ( 1 ) 1382512560.72131 | ERROR BatteryVoltage Async request failed ( 1 ) Thanks On Sat, Oct 19, 2013 at 9:51 AM, Chino Aureus <chino.aur...@gmail.com>wrote: > i see. I missed the plugins directory. > > Thanks :) > > > On Sat, Oct 19, 2013 at 1:11 AM, Rees, Kevron <kevron.m.r...@intel.com>wrote: > >> AMB has a number of plugins. The OBD2 plugin is what you want. You >> have to enable it at configure time for it to build. Take a look at >> the README[1] for the plugin to see how to enable it and configure it >> with your device. There is also a wiki page[2] on how to get AMB to >> work with OBD-II scantools on Tizen. >> >> Cheers, >> Kevron >> >> [1] - >> https://github.com/otcshare/automotive-message-broker/blob/0.10/plugins/obd2plugin/README >> [2] - >> https://wiki.tizen.org/wiki/Automotive_Message_Broker#Configuring_and_using_the_OBD-II_plugin >> >> On Fri, Oct 18, 2013 at 9:54 AM, Chino Aureus <chino.aur...@gmail.com> >> wrote: >> > Hi Kevron, >> > >> > Thanks. >> > >> > I'm trying to understand AMB's architecture. Upon looking at the doc >> > included in the package, it seems that AMB package does not include >> modules >> > or source code that directly connects to an OBD2 source e.g. >> USB/BLUETOOTH. >> > Is this correct? >> > >> > I was able to build AMB in ubuntu 12.10 now and I have a OBD2 device >> from >> > Scantool. Any suggestion how can test AMB with my device? >> > >> > :) >> > >> > Thanks in advance. >> > Chino >> > >> > >> > On Fri, Sep 13, 2013 at 6:34 AM, Rees, Kevron <kevron.m.r...@intel.com> >> > wrote: >> >> >> >> After months of steady improvements, 0.10 is now officially released. >> >> >> >> Release notes for release 0.10 >> >> >> >> New features: >> >> >> >> - Added org.automotive.Manager DBus interface. >> >> - Added org.automotive.Manager.findProperty method for finding a >> specific >> >> object path for a given property >> >> - OBD2 add support for AT/ST calls (ie, atrv for battery voltage) >> >> - Added automatic and configurable timeout for get() calls >> >> - Added error type for get() calls >> >> - Added getHistory dbus method for vehicle data objects >> >> - Added time and sequence properties to dbus vehicle data object >> >> - Implemented org.freedesktop.DBus.Properties.PropertiesChanged signal >> >> >> >> Changes: >> >> >> >> - AbstractPropertyType class now contains information for zone and the >> >> property name (zone is unused in 0.10) >> >> - Clean up sink subscription process so that subscription only happens >> >> once regardless of whether the property is supported or not at the time >> >> >> >> Fixes: >> >> >> >> - Fill in the fromGVariant() methods in list and map abstract property >> >> types >> >> >> >> Thanks, >> >> Kevron >> >> >> >> _______________________________________________ >> >> IVI mailing list >> >> IVI@lists.tizen.org >> >> https://lists.tizen.org/listinfo/ivi >> >> >> > >> > >> > _______________________________________________ >> > IVI mailing list >> > IVI@lists.tizen.org >> > https://lists.tizen.org/listinfo/ivi >> > >> > >
_______________________________________________ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi