I get sound and black and white video - same as with cardtype=7. I did a cold boot after changing /etc/modules to cardtype=6.
Thanks! Justin ----- Original message ----- From: "Hans Verkuil" <[EMAIL PROTECTED]> To: "Discussion list for development of the IVTV driver" <[email protected]> Date: Fri, 7 Oct 2005 21:26:45 +0200 Subject: Re: [ivtv-devel] Black & White Picture on Yuan MPC622 with 0.3.9-2755svn On Friday 07 October 2005 21:08, Justin I. Nevill wrote: > Hi folks, > > I haven't been keeping up with the mailing list for a while, and I come > back and there's been soooo much progress! Way to go folks! > > I'm using a Yuan MPC622 > (http://www.yuan.com.tw/en/products/vdo_mpc622.html) on a 2.4.31 kernel. > I think this is very similar to the PG600, but with a different tuner. > (I'm not using the tuner BTW, just composite or s-video input). Here's > the issue: > > When using 'insmod ivtv cardtype=7; insmod cx25840' I get sound and > video, but the video is only black and white. When using 'insmod ivtv; > insmod cx25840', it's autodetected as a PVR-250 and I get a full color > picture, but no sound. > > cardtype=7 seems to give me the best overall results (I get sound, and > the inputs are more correct than with other card types), but I can't > figure out why I'm only getting black & white. What happens if you choose cardtype 6? Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
