--- Nick Rosier <[EMAIL PROTECTED]> wrote: > On 11/8/05, Stef Bon <[EMAIL PROTECTED]> > wrote: > > Hello, > > > > I've got a PVR-150, and I can't get it working. > I've got it for almost a year > > now, and never got it working. > > > > Now I'm using ivtv-0.4.0. > > > > ivtv-detect gives: > > > > driver: ivtv-0.4.0 (tagged release) > > card: WinTV PVR 150, bus info 0000:00:0d.0, ivtv > card #0 > > hardware: cx25840 tda9887 vm8775 tveeprom > > /dev/video0: MPG encoding > > /dev/radio0: Radio > > /dev/vbi0: VBI encoding > > /dev/video24: PCM encoding > > /dev/video32: YUV encoding > > > > My options: > > > > options ivtv ivtv_debug=1 tuner=38 ivtv_std=2 > > > > Nov 8 11:40:13 celeron ivtv: > ==================== START INIT IVTV > > ==================== > > Nov 8 11:40:13 celeron ivtv: version 0.4.0 > (tagged release) loading > > Nov 8 11:40:13 celeron ivtv: Linux version: > 2.6.14ivtv PENTIUM4 gcc-3.4 > > Nov 8 11:40:13 celeron ivtv: In case of problems > please include the debug > > info > > Nov 8 11:40:13 celeron ivtv: between the START > INIT IVTV and END INIT IVTV > > lines when > > Nov 8 11:40:13 celeron ivtv: mailing the > ivtv-devel mailinglist. > > Nov 8 11:40:13 celeron ivtv0: Autodetected WinTV > PVR 150 card (iTVC16 based) > > Nov 8 11:40:13 celeron tveeprom: ivtv version > > Nov 8 11:40:13 celeron tveeprom: Hauppauge: model > = 26559, rev = C260, > > serial# = 2897697 > > Nov 8 11:40:13 celeron tveeprom: tuner = LG S001D > MK3 (idx = 60, type = 38) > > Nov 8 11:40:13 celeron tveeprom: tuner fmt = > PAL(B/G) PAL(I) SECAM(L/L') > > PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > Nov 8 11:40:13 celeron tveeprom: audio processor > = CX25843 (type = 25) > > Nov 8 11:40:13 celeron tveeprom: decoder > processor = CX25843 (type = 1e) > > Nov 8 11:40:13 celeron ivtv0: i2c attach to card > #0 ok [client=tveeprom, > > addr=50] > > Nov 8 11:40:13 celeron tuner (ivtv): chip found > at addr 0xc2 i2c-bus ivtv i2c > > driver #0 > > Nov 8 11:40:13 celeron ivtv0: i2c attach to card > #0 ok [client=(tuner unset), > > addr=61] > > Nov 8 11:40:13 celeron cx25840 1-0044: cx25843-23 > found @ 0x88 (ivtv i2c > > driver #0) > > Nov 8 11:40:13 celeron cx25840 1-0044: loaded > /lib/firmware/ivtv/HcwMakoA.ROM > > firmware (14264 bytes) > > Nov 8 11:40:13 celeron ivtv0: i2c attach to card > #0 ok [client=cx25840, > > addr=44] > > Nov 8 11:40:13 celeron wm8775 1-001b: chip found > @ 0x36 (ivtv i2c driver #0) > > Nov 8 11:40:13 celeron ivtv0: i2c attach to card > #0 ok [client=wm8775, > > addr=1b] > > Nov 8 11:40:13 celeron tda9885/6/7: (ivtv) chip > found @ 0x86 > > Nov 8 11:40:13 celeron ivtv0: i2c attach to card > #0 ok [client=tda9887, > > addr=43] > > Nov 8 11:40:13 celeron ivtv0: loading > /lib/firmware/ivtv/ivtv-fw-enc.bin > > Nov 8 11:40:13 celeron ivtv0: Encoder revision: > 0x02050032 > > Nov 8 11:40:13 celeron ivtv0: Allocate DMA > encoder MPEG stream: 128 x 32768 > > buffers (4096KB total) > > Nov 8 11:40:13 celeron ivtv0: Allocate DMA > encoder YUV stream: 161 x 12960 > > buffers (2048KB total) > > Nov 8 11:40:13 celeron ivtv0: Allocate DMA > encoder VBI stream: 80 x 26208 > > buffers (2048KB total) > > Nov 8 11:40:13 celeron ivtv0: Allocate DMA > encoder PCM audio stream: 455 x > > 4608 buffers (2048KB total) > > Nov 8 11:40:13 celeron ivtv0: Create encoder > radio stream > > Nov 8 11:40:13 celeron tuner: type set to 38 > (Philips PAL/SECAM multi > > (FM1216ME MK3)) by ivtv i2c driver #0 > > Nov 8 11:40:13 celeron ivtv0: Initialized WinTV > PVR 150, card #0 > > Nov 8 11:40:13 celeron ivtv: > ==================== END INIT IVTV > > ==================== > > > > So far so good, but when playing mplayer like: > > > > mplayer -v -x 640 -y 480 /dev/video0 > > > > gives : > > > > ..... > > Playing /dev/video0. > > [file] File size is 0 bytes > > STREAM: [file] /dev/video0 > > STREAM: Description: File > > STREAM: Author: akbeu > > STREAM: Comment: based on the code from ??? > (probably Arpi) > > > > And > > > > mplayer tv:// freq=202.852 height=576 width=720 > device=/dev/video0 > > > > gives a small screen (not 576x720!) with only > green : > > > > Playing tv://. > > TV detected! ;-) > > Selected driver: dummy > > name: NULL-TV > > author: alex > > Selected input hasn't got a tuner! > > .. > > Opening video decoder: [raw] RAW Uncompressed > Video > > VDec: vo config request - 320x200 (preferred csp: > Planar YV12) > > VDec: using Planar YV12 as output csp (no 0) > > > > > > No screen, nothing. > > > > Can somebody help me? Is this a mplayer thing or > ivtv? But what is the remedy? > > I've bought this card, but has never worked for > me! I've spent a lot of time > > getting it working, and I don't know anymore what > to do. > > What does ivtv-detect return? > Try: > > dd if=/dev/video0 of=capture.mpg bs=64k count=500 > > Check the capture; does file capture.mpg return it's > an mpeg2 stream? > Try to play it with mplayer. Try to play it on a > doze-box. > > N. > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > I guess check that /dev/video0 is a device and not a file which is what mplayer suggests. What is the output of
ls -l /dev/video* John _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
