Hello. I've compiled ivtv module and run modprobe ivtv. And got these messages in dmesg. Could you help me to make my tuner work?
Also I found firware for this tuner in drivers for WinXP (called cxfalcon.rom and makoaud.rom). Should I them instead of those on your site. ---------------------------------------------------------------------------- Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-algo-bit.o: i2c bit algorithm module ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.4.31 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 12ab/0600 ivtv0: iTVC16 based ivtv0: Defaulting to WinTV PVR 250 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv0: Prefix your subject line with [UNKNOWN CARD]. ivtv0: Unreasonably low latency timer, setting to 64 (was 32) i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0. i2c-core.o: driver tveeprom registered. tveeprom: Encountered bad packet header [56]. Corrupt or not a Hauppauge eeprom. ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] i2c-core.o: client [tveeprom] registered to adapter [ivtv i2c driver #0](pos. 0). ivtv0: No tuner detected, default to NTSC i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0] (pos. 1). i2c-core.o: driver saa7115 registered. saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] i2c-core.o: client [saa7115] registered to adapter [ivtv i2c driver #0](pos. 2). i2c-core.o: driver i2c msp3400 driver registered. i2c-core.o: driver i2c tda9887 driver registered. tda9885/6/7: chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] i2c-core.o: client [tda9887] registered to adapter [ivtv i2c driver #0](pos. 3). ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11! ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! ivtv0 warning: i2c client addr: 0x40 not found for command 0x40307603! ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! ivtv0 warning: i2c client addr: 0x40 not found for command 0x4004760f! ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
