Paul Curtis wrote:
paul wrote:
I have some difficulties with playing video from my PVR350 directly
from /dev/video0 using mplayer. After a few minutes, the screen gets
updated very slowly and will hang shortly after. I can play DVD's
without problems. When I do "cat /dev/video0 > file.mpg" and "mplayer
file.mpg" I do not have any issues either.
There are no message in dmesg or in /var/log. mplayer says my 2.4GHz
P4 is too slow(?) and suggests to use different output drivers (ao
and vo) but I am unable to get to a working solution.
mplayer -cache 1024 -vf crop=704:560:6:6,pp=lb/al -monitoraspect 1.25
/dev/video0
Test 'mplayer' without all the post-processing. I'd suggest checking
the ivtv drivers with 'mplayer -cache 8192 /dev/video0'. I suspect
that the problem lies in the four post-processing options you have
asked 'mplayer' to perform.
I have a hard time believing this. The processor load is less than 10%.
And I have no problems with the same options when playing from a file
coming from cat /dev/video0>file.mpg
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
