Hello i've just mail the ivtv-user list to ask a question but the dmesg says to write to the dvel list for an unknown card so i send you the information :
I've got a sony vaio V3S computer (so called in europe) see : http://vaio.sony-europe.com/view/ShowProduct.action?product=VGC-V3S&site=ite_en_GB&category=VD+V+Series my lspci send : 0000:02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) and the dmesg is this one : [4497494.185000] ivtv: ==================== START INIT IVTV ==================== [4497494.185000] ivtv: version 0.4.1 (tagged release) loading [4497494.185000] ivtv: Linux version: 2.6.12-10-386 386 gcc-3.4 [4497494.185000] ivtv: In case of problems please include the debug info between [4497494.185000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [4497494.185000] ivtv: any module options, when mailing the ivtv-users mailinglist. [4497494.186000] ivtv0: Unknown card: vendor/device: 4444/0016 [4497494.186000] ivtv0: subsystem vendor/device: 104d/816d [4497494.186000] ivtv0: cx23416 based [4497494.186000] ivtv0: Defaulting to WinTV PVR 250 card [4497494.186000] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of [4497494.186000] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) [4497494.186000] ivtv0: Prefix your subject line with [UNKNOWN CARD]. [4497494.186000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 21 [4497494.259000] tveeprom: Encountered bad packet header [aa]. Corrupt or not a Hauppauge eeprom. [4497494.259000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [4497494.263000] ivtv0: No tuner detected, default to NTSC [4497494.271000] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 [4497494.272000] All bytes are equal. It is not a TEA5767 [4497494.273000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] [4497494.303000] saa7115 0-0021: ivtv driver [4497494.303000] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [4497494.510000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] [4497494.542000] msp3400 0-0040: ivtv driver [4497494.542000] msp3400 0-0040: chip=MSP3417G-B8 +nicam +simple +simpler +radio mode=simpler [4497494.542000] msp3400 0-0040: msp34xxg daemon started [4497494.549000] ivtv0: i2c attach to card #0 ok [client=MSP3417G-B8, addr=40] [4497494.584000] tda9887 0-0042: (ivtv) chip found @ 0x84 (ivtv i2c driver #0) [4497494.584000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=42] [4497495.299000] ivtv0: unable to open firmware v4l-cx2341x-enc.fw [4497495.299000] ivtv0: did you put the firmware in the hotplug firmware directory? [4497495.299000] ivtv0 warning: failed loading encoder firmware [4497495.299000] ivtv0 warning: Error loading firmware -3! [4497495.299000] ivtv0: Error -3 initializing firmware. [4497495.308000] ivtv0: Error -12 on initialization [4497495.308000] ivtv: probe of 0000:02:09.0 failed with error -12 i'm running a ubuntu 5.1, kernel 2.6.12-10-386, i followed the howto and i'm unable to make my card run i tried tv apps like kdetv nothing works, no device /dev/video0 is found. Thanks a lot in advance for your help Bye Remi Lille, France _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
