This is a Haup Brand Pvr150 with the ir receiver and blaster. Fwiw, it works so far.
Regards Kelsie ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.2 (tagged release) loading ivtv: Linux version: 2.6.16.16-intelp4 SMP preempt PENTIUM4 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 0070/37f3 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 18 (level, low) -> IRQ 16 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 26132, rev C599, serial# 8911369 tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25841 (idx 35) tveeprom 1-0050: decoder processor is CX25841 (idx 28) tveeprom 1-0050: has no radio, has IR remote tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
