On Wednesday 08 February 2006 00:43, Jarod Wilson wrote: > On Feb 07, 2006, at 22:53, [EMAIL PROTECTED] wrote: > >> I almost finished with video part (except scaler ops) and i got > >> correct > >> picture on /dev/video0 output, but broken on /dev/video32 (seems like > >> incorrect macroblock permutations or mplayer's nv12 type not > >> supported > >> correctly, i can send a screenshot). > > > > Sounds wonderful! > > > > And could anyone test current SVN by MPG600GR(NTSC) version of > > wo/GR,YCS or wo/GR ? > > I've been meaning to dig out the MPG600GR I've got that's sans-GR/YCS > and try it out since the merge, just haven't had time. Lemme see if I > can't get to it this weekend...
A little tardy getting around to it, but I finally tried out my MPG600GR today, with current svn trunk ivtv and v4l-dvb. The drivers mostly load okay, though I get a few i2c hardware not found messages, which I'm guessing are the missing GR and YCS chips, and I get no video off the tuner (just a black screen), while ~1 year ago, I was able to at least get black and white video off the tuner (paken 0.2.x-based ivtv, iirc). While trying to find any working video right now, a bunch of these get logged: ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c! Here's the output from ivtv loading: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (development revision 3157) loading ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP card (cx23416 based) ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) ivtv0: Could not detect tuner standard, defaulting to NTSC. status: (1E) 0x48, (1F) 0xc0 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c! ivtv0: Initialized Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP, card #0 ivtv: ==================== END INIT IVTV ==================== -- Jarod Wilson [EMAIL PROTECTED]
pgpNZwjP12bpC.pgp
Description: PGP signature
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
