On Saturday 18 February 2006 06:01, Jarod Wilson wrote:
> On Wednesday 08 February 2006 00:43, Jarod Wilson wrote:
> > On Feb 07, 2006, at 22:53, [EMAIL PROTECTED] wrote:
> > >> I almost finished with video part (except scaler ops) and i got
> > >> correct
> > >> picture on /dev/video0 output, but broken on /dev/video32 (seems
> > >> like incorrect macroblock permutations or mplayer's nv12 type
> > >> not supported
> > >> correctly, i can send a screenshot).
> > >
> > > Sounds wonderful!
> > >
> > > And could anyone test current SVN by MPG600GR(NTSC) version of
> > > wo/GR,YCS or wo/GR ?
> >
> > I've been meaning to dig out the MPG600GR I've got that's
> > sans-GR/YCS and try it out since the merge, just haven't had time.
> > Lemme see if I can't get to it this weekend...
>
> A little tardy getting around to it, but I finally tried out my
> MPG600GR today, with current svn trunk ivtv and v4l-dvb. The drivers
> mostly load okay, though I get a few i2c hardware not found messages,
> which I'm guessing are the missing GR and YCS chips, and I get no
> video off the tuner (just a black screen), while ~1 year ago, I was
> able to at least get black and white video off the tuner (paken
> 0.2.x-based ivtv, iirc). While trying to find any working video right
> now, a bunch of these get logged:
>
> ivtv0: i2c hardware 0x00005000 not found for command 0xc008561c!
That's a bug. I've just fixed this. Can you try again?
Thanks,
Hans
>
>
> Here's the output from ivtv loading:
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.7.0 (development revision 3157) loading
> ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP card
> (cx23416 based)
> ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level,
> low) -> IRQ 10
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> ivtv0: Could not detect tuner standard, defaulting to NTSC.
> status: (1E) 0x48, (1F) 0xc0
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or
> FM1236/F)) ivtv0: i2c hardware 0x00005000 not found for command
> 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command
> 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command
> 0xc008561c! ivtv0: i2c hardware 0x00005000 not found for command
> 0xc008561c! ivtv0: Initialized Yuan MPG600GR/Kuroutoshikou
> CX23416GYC-STVLP, card #0 ivtv: ==================== END INIT IVTV
> ====================
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
