On Wednesday 10 May 2006 17:06, Avery Fay wrote:
> Hello,
>
> I just bought a couple Hauppauge PVR 150's for a
> mythtv box I'm trying to set up and I'm having trouble
> getting them to work. Originally, the tuner type
> (model TCL M2523_5N_E) wasn't being detected properly.
> By going through list archives, it looks like that
> problem was fixed by forcing it to tuner type 50.
> After doing this though, I'm only able to tune into
> channels 5 and 6 via the command line as well as in
> mythtv. Worse, the color on these channels is almost
> completely grayscale, but if you look really close at
> say something that should be big and red you can see
> some color. Also, the video quality of channel 6 is
> pretty bad although the audio for both channels seems
> to be fine. Every other channel is static (when I
> switch the cable to my tv, I can receive around 70
> channels perfectly... ntsc cable).
>
> I don't really know what other info to give. dmesg
> output is at the end of the mail. I'm running Fedora
> Core 5 with the latest atrpms ivtv packages.
ivtv-0.6 uses the tuner/tveeprom modules from the kernel instead of
supplying its own versions of these modules. Unfortunately, that does
mean that support for newer tuners is slower to arrive than it used to
be. In this case your tuner is not yet autodetected properly in 2.6.16.
This will be fixed when 2.6.17 arrives.
In the meantime the easiest way is to load ivtv with the module option
tuner=50. That will force the correct tuner.
Regards,
Hans
>
> Any ideas would be greatly appreciated.
>
> Thanks,
> Avery
>
> (sorry about the extra stuff, didn't want to miss
> something important so I didn't do any snipping)
>
> May 10 07:52:56 elephant kernel: ivtv:
> ==================== START INIT IVTV
> ====================
> May 10 07:52:56 elephant kernel: ivtv: version 0.6.2
> (development snapshot compiled on Mon May 8 07:48:42
> 2006) loading
> May 10 07:52:56 elephant kernel: ivtv: Linux version:
> 2.6.16-1.2111_FC5 SMP gcc-4.1
> May 10 07:52:56 elephant kernel: ivtv: In case of
> problems please include the debug info between
> May 10 07:52:56 elephant kernel: ivtv: the START INIT
> IVTV and END INIT IVTV lines, along with
> May 10 07:52:56 elephant kernel: ivtv: any module
> options, when mailing the ivtv-users mailinglist.
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> Link [APCL] enabled at IRQ 23
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low)
> -> IRQ 16
> May 10 07:52:56 elephant kernel: ehci_hcd
> 0000:00:02.1: EHCI Host Controller
> May 10 07:52:56 elephant kernel: ehci_hcd
> 0000:00:02.1: debug port 1
> May 10 07:52:56 elephant kernel: ehci_hcd
> 0000:00:02.1: new USB bus registered, assigned bus
> number 2
> May 10 07:52:56 elephant kernel: ehci_hcd
> 0000:00:02.1: irq 16, io mem 0xfeb00000
> May 10 07:52:56 elephant kernel: ehci_hcd
> 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> May 10 07:52:56 elephant kernel: usb usb2:
> configuration #1 chosen from 1 choice
> May 10 07:52:56 elephant kernel: hub 2-0:1.0: USB hub
> found
> May 10 07:52:56 elephant kernel: hub 2-0:1.0: 10 ports
> detected
> May 10 07:52:56 elephant kernel: sd 2:0:0:0: Attached
> scsi generic sg0 type 0
> May 10 07:52:56 elephant kernel: ivtv0: Autodetected
> Hauppauge WinTV PVR-150 card (cx23416 based)
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> Link [APC4] enabled at IRQ 19
> May 10 07:52:56 elephant kernel: GSI 21 sharing vector
> 0xD9 and IRQ 21
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low)
> -> IRQ 21
> May 10 07:52:56 elephant kernel: ivtv0: Unreasonably
> low latency timer, setting to 64 (was 32)
> May 10 07:52:56 elephant kernel: tveeprom 2-0050:
> Hauppauge model 26132, rev F0B2, serial# 9400010
> May 10 07:52:56 elephant kernel: tveeprom 2-0050:
> tuner model is TCL M2523_5N_E (idx 112, type 4)
> May 10 07:52:56 elephant kernel: tveeprom 2-0050: TV
> standards NTSC(M) (eeprom 0x08)
> May 10 07:52:56 elephant kernel: tveeprom 2-0050:
> audio processor is CX25841 (idx 35)
> May 10 07:52:56 elephant kernel: tveeprom 2-0050:
> decoder processor is CX25841 (idx 28)
> May 10 07:52:56 elephant kernel: tveeprom 2-0050: has
> no radio, has IR remote
> May 10 07:52:56 elephant kernel: tuner 2-0061: chip
> found @ 0xc2 (ivtv i2c driver #0)
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> Link [APCJ] enabled at IRQ 22
> May 10 07:52:56 elephant kernel: ACPI: PCI Interrupt
> 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low)
> -> IRQ 17
> May 10 07:52:57 elephant kernel: cx25840 2-0044:
> cx25841-23 found @ 0x88 (ivtv i2c driver #0)
> May 10 07:52:57 elephant kernel:
> intel8x0_measure_ac97_clock: measured 191384 usecs
> May 10 07:52:57 elephant kernel: intel8x0: clocking to
> 48000
> May 10 07:52:57 elephant kernel: usb 1-1: new low
> speed USB device using ohci_hcd and address 2
> May 10 07:52:57 elephant kernel: cx25840 2-0044:
> loaded v4l-cx25840.fw firmware (16382 bytes)
> May 10 07:52:57 elephant kernel: usb 1-1:
> configuration #1 chosen from 1 choice
> May 10 07:52:57 elephant kernel: input: CHESEN USB
> Keyboard as /class/input/input0
> May 10 07:52:57 elephant kernel: input: USB HID v1.10
> Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-1
> May 10 07:52:57 elephant kernel: input: CHESEN USB
> Keyboard as /class/input/input1
> May 10 07:52:57 elephant kernel: input: USB HID v1.10
> Device [CHESEN USB Keyboard] on usb-0000:00:02.0-1
> May 10 07:52:57 elephant gpm[2246]: *** info
> [startup.c(95)]:
> May 10 07:52:57 elephant kernel: wm8775 2-001b: chip
> found @ 0x36 (ivtv i2c driver #0)
> May 10 07:52:57 elephant kernel: usb 1-2: new low
> speed USB device using ohci_hcd and address 3
> May 10 07:52:57 elephant kernel: usb 1-2:
> configuration #1 chosen from 1 choice
> May 10 07:52:57 elephant kernel: input: Kensington
> Kensington USB/PS2 Wheel Mouse as /class/input/input2
> May 10 07:52:57 elephant kernel: input: USB HID v1.10
> Mouse [Kensington Kensington USB/PS2 Wheel Mouse]
> on usb-0000:00:02.0-2
> May 10 07:52:57 elephant kernel: ivtv0: loaded
> v4l-cx2341x-enc.fw firmware (262144 bytes)
> May 10 07:52:57 elephant gpm[2246]: Started gpm
> successfully. Entered daemon mode.
> May 10 07:52:57 elephant kernel: ivtv0: Encoder
> revision: 0x02050032
> May 10 07:52:57 elephant kernel: ivtv0: Allocate DMA
> encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> May 10 07:52:57 elephant kernel: ivtv0: Allocate DMA
> encoder YUV stream: 194 x 10800 buffers (2048KB total)
> May 10 07:52:57 elephant kernel: ivtv0: Allocate DMA
> encoder VBI stream: 120 x 17472 buffers (2048KB total)
> May 10 07:52:57 elephant kernel: ivtv0: Allocate DMA
> encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> May 10 07:52:57 elephant kernel: tuner 2-0061: type
> set to 50 (TCL 2002N)
> May 10 07:52:57 elephant kernel: ivtv0: Initialized
> Hauppauge WinTV PVR-150, card #0
> May 10 07:52:57 elephant kernel: ivtv:
> ====================== NEXT CARD
> ======================
> May 10 07:52:57 elephant kernel: ivtv1: Autodetected
> Hauppauge WinTV PVR-150 card (cx23416 based)
> May 10 07:52:57 elephant kernel: ACPI: PCI Interrupt
> Link [APC1] enabled at IRQ 16
> May 10 07:52:57 elephant kernel: GSI 22 sharing vector
> 0xE1 and IRQ 22
> May 10 07:52:57 elephant kernel: ACPI: PCI Interrupt
> 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low)
> -> IRQ 22
> May 10 07:52:57 elephant kernel: ivtv1: Unreasonably
> low latency timer, setting to 64 (was 32)
> May 10 07:52:57 elephant kernel: tuner 3-0061: chip
> found @ 0xc2 (ivtv i2c driver #1)
> May 10 07:52:57 elephant kernel: cx25840 3-0044:
> cx25841-23 found @ 0x88 (ivtv i2c driver #1)
> May 10 07:52:57 elephant kernel: cx25840 3-0044:
> loaded v4l-cx25840.fw firmware (16382 bytes)
> May 10 07:52:57 elephant kernel: wm8775 3-001b: chip
> found @ 0x36 (ivtv i2c driver #1)
> May 10 07:52:57 elephant kernel: tveeprom 3-0050:
> Hauppauge model 26132, rev F0B2, serial# 9400447
> May 10 07:52:57 elephant kernel: tveeprom 3-0050:
> tuner model is TCL M2523_5N_E (idx 112, type 4)
> May 10 07:52:57 elephant kernel: tveeprom 3-0050: TV
> standards NTSC(M) (eeprom 0x08)
> May 10 07:52:57 elephant kernel: tveeprom 3-0050:
> audio processor is CX25841 (idx 35)
> May 10 07:52:57 elephant kernel: tveeprom 3-0050:
> decoder processor is CX25841 (idx 28)
> May 10 07:52:57 elephant kernel: tveeprom 3-0050: has
> no radio, has IR remote
> May 10 07:52:57 elephant kernel: ivtv1: loaded
> v4l-cx2341x-enc.fw firmware (262144 bytes)
> May 10 07:52:57 elephant kernel: ivtv1: Encoder
> revision: 0x02050032
> May 10 07:52:57 elephant kernel: ivtv1: Allocate DMA
> encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> May 10 07:52:57 elephant kernel: ivtv1: Allocate DMA
> encoder YUV stream: 194 x 10800 buffers (2048KB total)
> May 10 07:52:57 elephant kernel: ivtv1: Allocate DMA
> encoder VBI stream: 120 x 17472 buffers (2048KB total)
> May 10 07:52:57 elephant kernel: ivtv1: Allocate DMA
> encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> May 10 07:52:57 elephant kernel: tuner 3-0061: type
> set to 50 (TCL 2002N)
> May 10 07:52:57 elephant kernel: ivtv1: Initialized
> Hauppauge WinTV PVR-150, card #1
> May 10 07:52:57 elephant kernel: ivtv:
> ==================== END INIT IVTV
> ====================
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
