I have the same problem with audio disappearing on my pvr-350-only system. I can get audio back by rebooting or by removing the modules and reloading them. I've gone so far as to create a script to do it, because it happens maybe once a week, sometimes it's only once every 2 weeks. I'm not using the decoder for audio, only for xv video output.
I haven't really examined logs when it happens, I was more interested in just getting it working again. I'll try to harvest logs the next time it occurs - but sometimes I don't notice until I play back recordings and I notice that all the day's recordings have no sound. Mike Shields On 6/26/06, John Harvey <[EMAIL PROTECTED]> wrote: > Can you also determine if it's the same cmd (ie 0x000060). > Myth has been running here using the ivtv X driver for about 2 months > without crashing. > > John > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Duncan Webb > > Sent: 26 June 2006 14:16 > > To: [email protected] > > Subject: [ivtv-devel] X-driver crash and audio stream loss > > > > Hi List, > > > > Does anybody know why the IVTV X-Driver sometimes crashes or > > why the audio stream disappears? > > > > I'm curious if anybody run a system with a PVR-350 all the > > time everyday, without any problems? > > > > In the kernel log I get the following messages after the > > systems has been running for a while. I'm trying to determine > > what "a while" means but it is in the order to 2 to 3 days. > > > > ivtv0 warning: No Free Mailbox for cmd 0x00000060 after 100 tries! > > ivtv0 warning: Mailbox[0] 0x00000060 flags 0x00000003 ivtv0 > > warning: Mailbox[1] 0x00000060 flags 0x00000003 ivtv0 > > warning: Firmware UNRESPONSIVE when trying cmd 0x00000060!!! > > ivtv0-osd warning: Need to adjust to width 720 src_w 720 > > dst_w 720 src_x 0 dst_x 0 ivtv0-osd warning: Need to adjust > > to height 576 src_h 576 dst_h 576 src_y 0 dst_y 0 ivtv0-osd > > warning: Source video: Interlaced ivtv0 warning: Enable video output > > > > Usually a reboot is needed before because the audio signal > > has been lost from the mpeg file. When the audio breaks there > > is nothing reported in the kernel log. > > > > Hardware is a Hauppauge PVR-350 > > Driver: version 0.4.0->0.4.5 > > Firmware encoder revision: 0x02050032 > > Firmware decoder revision: 0x02020023 > > > > > > TIA > > Duncan > > > > > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
