On Tuesday 27 June 2006 12:03, Nick Houston wrote:
> I'm Running Gentoo Linux 2.6.15-gentoo-r1 with ivtv 0.4.5
> I upgraded my previous BTTV card for the PVR-150 but the tuner in
> this card is listed as Tuner_Absent in the tveeprom.c file.
>
> I have been running my card as tuner type 37 but I can not get a
> clear picture or sound in UHF, but VHF seams to work fine though.
Try tuner 38. This tuner is indeed unsupported, but with luck it matches
the philips tuner.
Hans
>
> I have tried tuner 55 but I have the same results.
>
> Any ideas on what I can do to fix this?
>
> dmesg output
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.5 (tagged release) loading
> ivtv: Linux version: 2.6.15-gentoo-r1 PENTIUMIII gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> PCI: Enabling device 0000:00:0f.0 (0114 -> 0116)
> PCI: Found IRQ 10 for device 0000:00:0f.0
> PCI: Sharing IRQ 10 with 0000:00:11.0
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tveeprom 1-0050: Hauppauge model 26059, rev E162, serial# 9478008
> tveeprom 1-0050: tuner model is LG S701D MK3 (idx 62, type 4)
> tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K)
> (eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37)
> tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> tveeprom 1-0050: has no radio, has IR remote
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 37 (LG
> PAL (newer TAPC series))
> ivtv0: Initialized WinTV PVR 150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
>
> lspci -v output00:0f.0 Multimedia video controller: Internext
> Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem:
> Hauppauge computer works Inc. WinTV PVR 150 Flags: bus master, medium
> devsel, latency 64, IRQ 10 Memory at e8000000 (32-bit, prefetchable)
> [size=64M] Capabilities: [44] Power Management version 2
>
>
> Cheers
>
> Nick
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
