Thanks for that, that seams
to work.
Cheers
Nick
Hans Verkuil wrote:
On Tuesday 27 June 2006 12:03, Nick Houston wrote:
I'm Running Gentoo Linux 2.6.15-gentoo-r1 with ivtv 0.4.5
I upgraded my previous BTTV card for the PVR-150 but the tuner in
this card is listed as Tuner_Absent in the tveeprom.c file.
I have been running my card as tuner type 37 but I can not get a
clear picture or sound in UHF, but VHF seams to work fine though.
Try tuner 38. This tuner is indeed unsupported, but with luck it matches
the philips tuner.
Hans
I have tried tuner 55 but I have the same results.
Any ideas on what I can do to fix this?
dmesg output
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.5 (tagged release) loading
ivtv: Linux version: 2.6.15-gentoo-r1 PENTIUMIII gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: Enabling device 0000:00:0f.0 (0114 -> 0116)
PCI: Found IRQ 10 for device 0000:00:0f.0
PCI: Sharing IRQ 10 with 0000:00:11.0
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 1-0050: Hauppauge model 26059, rev E162, serial# 9478008
tveeprom 1-0050: tuner model is LG S701D MK3 (idx 62, type 4)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K)
(eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has no radio, has IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
(2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 37 (LG
PAL (newer TAPC series))
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
lspci -v output00:0f.0 Multimedia video controller: Internext
Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem:
Hauppauge computer works Inc. WinTV PVR 150 Flags: bus master, medium
devsel, latency 64, IRQ 10 Memory at e8000000 (32-bit, prefetchable)
[size=64M] Capabilities: [44] Power Management version 2
Cheers
Nick
|
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
