I have a new card that is not recognized. In addition there is other odd behavior. On both the first and second card, the driver reports that it is the second unit of a PVR 500.
I can't get the card to work. I am running SUSE 10.1 with ivtv-0.6.3 compiled with (raise the flag please) gcc 4.1.0-25 and the suse built 2.6.16.13-default kernel. I added the ID to the ivtv_pci_pvr150[] list and that makes the unknown card message go away but it still doesn't work. Does the card need to be added somewhere else also or do other changes need to be made? Right now only one card works at all. It has complete static on lower channels but only slight static on upper channels. Audio is good on all channels and it seems to tune to the correct frequencies for us-cable. What problems does compiling with gcc 3.x solve? Do I have to recompile the kernel with gcc 3.x if I recompile ivtv with gcc 3.x? Any ideas or solutions would be greatly appreciated. Thanks dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (tagged release) loading ivtv: Linux version: 2.6.16.13-4-default 586 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) tveeprom 0-0050: Hauppauge model 23552, rev D487, serial# 9525425 tveeprom 0-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: This is the second unit of a PVR500 ivtv0: Correcting tveeprom data: no radio present on second unit usb 1-1: new full speed USB device using uhci_hcd and address 2 tuner 0-0060: TEA5767 detected. tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) usb 1-1: new device found, idVendor=0609, idProduct=031d usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: eHome Infrared Transceiver usb 1-1: Manufacturer: SMK usb 1-1: SerialNumber: SM0059g4 usb 1-1: configuration #1 chosen from 1 choice cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i810 Chipset. agpgart: AGP aperture is 64M @ 0xf0000000 JBD: barrier-based sync failed on hda3 - disabling barriers cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) lirc_dev: module not supported by Novell, setting U taint flag. lirc_dev: IR Remote Control driver registered, at major 61 wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) lirc_mceusb2: module not supported by Novell, setting U taint flag. lirc_mceusb2: USB remote driver for LIRC v0.22 lirc_mceusb2: Martin Blatter <[EMAIL PROTECTED]> usb 1-1: reset full speed USB device using uhci_hcd and address 2 lirc_dev: lirc_register_plugin: sample_rate: 0 lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb1:2 usbcore: registered new driver lirc_mceusb2 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 0-0061: type set to 70 (Samsung TCPN 2121P30A) ivtv0: Initialized WinTV PVR 500 (unit #2), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Unknown card: vendor/device: 4444/0016 ivtv1: subsystem vendor/device: 0070/b7f7 ivtv1: cx23416 based ivtv1: Defaulting to Hauppauge WinTV PVR-150 card ivtv1: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv1: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN CARD]. tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23552, rev D487, serial# 9525425 tveeprom 1-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1 warning: Encoder mailbox not found ivtv1 warning: Decoder mailbox not found ivtv1: Error locating firmware. ivtv1: Error -12 on initialization ivtv: probe of 0000:02:09.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
