good news: trunk compiles now with v4l-dvb hg, and ivtv-fb works. But now I have no picture ...
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.9.0 (v4l-dvb + ivtv virtual merge) Revision: 3614 loading ivtv: Linux version: 2.6.18 preempt mod_unload 386 gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) PCI: Enabling device 0000:00:08.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and aut oselect tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 7066538 tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 ivtv0: Registered device video1 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi1 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv0-osd: framebuffer at 0xd5510000, mapped to 0xd1f90000, size 1665k ivtv0-osd: mode is 720x576x32, linelength=2880 ivtv0-osd: fb1: cx23415 TV out frame buffer device lirc_serial: auto-detected active low receiver lirc_dev: lirc_register_plugin: sample_rate: 0 ivtv0 warning: ENC DMA delayed 2000 usecs ivtv0 warning: ENC DMA delayed 2000 usecs ivtv0 warning: ENC DMA delayed 2000 usecs ivtv0 warning: ENC DMA delayed 2000 usecs -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
