On Saturday 25 November 2006 11:30, Martin Dauskardt wrote:
> good news: trunk compiles now with v4l-dvb hg, and ivtv-fb works. But
> now I have no picture ...
It may compile, but there are still locking issues which I haven't yet
had time to resolve. Combining MPEG decoding with OSD (which is
probably what is happening here) will not yet work.
Hans
>
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.9.0 (v4l-dvb + ivtv virtual merge) Revision: 3614
> loading ivtv: Linux version: 2.6.18 preempt mod_unload 386 gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge card (cx23415 based)
> PCI: Enabling device 0000:00:08.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level,
> low) -> IRQ 10 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
> bytes)
> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Decoder revision: 0x02020023
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c
> driver #0) saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is
> autodetect and aut oselect tveeprom 1-0050: Hauppauge model 48134,
> rev J342, serial# 7066538 tveeprom 1-0050: tuner model is Temic
> 4009FR5 (idx 42, type 20) tveeprom 1-0050: TV standards PAL(B/G)
> (eeprom 0x04)
> tveeprom 1-0050: audio processor is MSP4418 (idx 25)
> tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
> ivtv0: Autodetected Hauppauge WinTV PVR-350
> ivtv0: Registered device video1 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi1 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: Registered device video16 for decoder MPEG (1 MB)
> ivtv0: Registered device vbi8 for decoder VBI (1 MB)
> ivtv0: Registered device vbi16 for decoder VOUT
> ivtv0: Registered device video48 for decoder YUV (1 MB)
> ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
> tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069
> FR5)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
> ivtv: ==================== END INIT IVTV ====================
> ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0)
> ivtv0-osd: framebuffer at 0xd5510000, mapped to 0xd1f90000, size
> 1665k ivtv0-osd: mode is 720x576x32, linelength=2880
> ivtv0-osd: fb1: cx23415 TV out frame buffer device
> lirc_serial: auto-detected active low receiver
> lirc_dev: lirc_register_plugin: sample_rate: 0
> ivtv0 warning: ENC DMA delayed 2000 usecs
> ivtv0 warning: ENC DMA delayed 2000 usecs
> ivtv0 warning: ENC DMA delayed 2000 usecs
> ivtv0 warning: ENC DMA delayed 2000 usecs
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
