* Hans Verkuil <[EMAIL PROTECTED]> [2006-12-02 22:25]: > On Saturday 02 December 2006 22:58, Nuno Oliveira wrote: > > * Hans Verkuil <[EMAIL PROTECTED]> [2006-12-02 20:21]: > > > On Saturday 02 December 2006 20:55, Nuno Oliveira wrote: > > > > Hey, > > > > > > > > Similarly to what Martin Dauskardt ([EMAIL PROTECTED]) reported on Nov > > > > 19, I also get a lot of these errors > > > > > > > > ivtv0: i2c addr 0x21 not found for command 0xc0445624! > > > > last message repeated 3 times > > > > > > > > with a PVR-350 board, using 2.6.19 and ivtv-0.9.0. I can't get > > > > the card to work with these versions, although it works perfectly > > > > with 2.6.18 and ivtv-0.8.0. > > > > > > > > The kernel startup log follows. In the init phase there are > > > > already a number of these errors. Any ideas? > > > > > > Please add the following to the /etc/modprobe.conf file and try > > > again: > > > > > > options saa7115 debug=1 > > > > > > Post the same log again, it should now contain some saa7115 > > > debugging. > > > > > > Thanks, > > > > > > Hans > > > > Hans, > > > > Thanks for the help. > > > > With 0.9.0, I don't get a saa7115 module installed. > > Well, that's your problem then. No saa7115 module. See note 3 in the > ivtv README on how to make sure all necessary modules are compiled when > you build your own kernel. > > Hans
Hans, Ok, that was the problem. I know, it's in the README.. Probably some of this info should be updated in the web page as well. Thanks again, Nuno. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
