> On 1/29/07, Hans Verkuil <[EMAIL PROTECTED]> wrote:
>> Hi all,
>>
>> I had hoped to make a release candidate this weekend, but a nasty bug
>> was found which took me the whole Sunday to track down and fix. While
>> testing that bug fix I may have found another bug, so I'll have to do
>> more testing before I can make a release candidate.
>>
>> However, for all cards except the pvr350 it looks like it should work
>> fine, so please test the current trunk! Also test with MythTV with VBI:
>> it should work fine now!
>
> First test results:
> 1. This module is a little pickier about the firmware, it won't accept
> the greatest and latest pvr-500 fw from hauppauge (based on size), too
> bad, I had good results with it. :/
Read the README notes: it's the same firmware, just without the garbage at
the end.
> 2. It loads ok, and works.
> 3. Without vbi in mythtv tested recording 2 streams at the same time,
> this results in occasional glitches again, and they seem to be more
> prevalent than the old 0.9.2 (svn) module.
> 4. With vbi on, there are occasional freezes, glitches and audio glitches
> now.
Do you see any messages in the kernel log?
Thanks,
Hans
>
>
> Regards,
> Martin
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
