Hi,

It looks that this topic is my last chance to get an answer to my
question, which I already asked twice. I hope I will have this time
more luck.

"ivtvctl --reset-ir" gives me this on my PVR150 (0.10.1 with 2.6.20.1):
ioctl VIDIOC_INT_RESET failed: Invalid argument

and I need this command to work, because my IR is never recognized
after reboot. only if I suspend and wake up my computer, IR starts to
work (almost always).

Thanks. I would appreciate any help.

M.



ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.1 (tagged release) loading
ivtv:  Linux version: 2.6.20.1 SMP mod_unload K8
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 21
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to