Hi all, The new ivtv-0.10.2 driver for kernels 2.6.18-2.6.21 is now available here:
http://dl.ivtvdriver.org/ivtv/archive/0.10.x/ivtv-0.10.2.tar.gz This is the ChangeLog: - Replace SA_* with IRQF_*. - Add support for 2.6.21 kernels. - Fix radio audio stuttering. - Add autodetect for new PVR150 low-profile models. - Fix audio volume problem on CX23416GYC-STVLP. - First unregister driver, then free memory. Not the other way around. - Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. - Update the VIDIOC_INT_RESET define. - VIDIOC_INT_RESET changed starting 2.6.19, so check kernel version for correct VIDIOC_INT_RESET define. If you are using kernel 2.6.20 or kernel 2.6.20.1 then you should upgrade to a newer 2.6.20.x kernel: these two kernels have a bug that makes it impossible to load the cx25840 firmware. This was fixed in kernel 2.6.20.2. Enjoy, Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
