On Tuesday 29 May 2007 04:31 am, Hans Verkuil wrote: > Does this PVR250 have a different tuner compared to the others? It might > be interesting to compare the output of 'v4l2-ctl --log-status' for that > tuner while capturing channel 13 with the same output when capturing > another channel with that same card. > > Regards, > > Hans > > > My parents are reporting that card #1, a pvr250 of 3 total, whenever it > > is programmed to record channel 13, there is no audio. If any of the > > other cards (all 250's) record 13 the audio is fine. If card 1 records > > any > > other channel its also fine. > > > > I've copied a few seconds of an example file up and played it with > > mplayer, no audio there either. mplayer doesn't show anything > > unusual in its console output for audio either. > >
Hans, Thanks for the reply, was a little slow in reading it but I followed your suggestion. I programmed two cards, 0(bad) & 1(good) to each record channels 8 (sound works) and 13 (no sound on card 0). I captured the v4l2-ctl --log-status output of each. Hope this helps. Note the tveeprom error on card 0, channel 8, even tho that combo worked. Really appreciate any help / suggestions anyone can provide. Card 0 on channel 8 (good recording with sound, note the tveeprom error at the top). Status Log: ivtv0: ================= START STATUS CARD #0 ================= <4>tveeprom 2-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 181.25 MHz tuner 2-0061: Standard: 0x0000b000 saa7115 2-0021: Audio frequency: 48000 Hz saa7115 2-0021: Input: Composite 4 saa7115 2-0021: Video signal: broadcast/DVD saa7115 2-0021: Frequency: 60 Hz saa7115 2-0021: Detected format: NTSC saa7115 2-0021: Width, Height: 720, 480 msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 2-0040: Audio: volume 58950 msp3400 2-0040: Standard: 4.5 M BTSC-Stereo (stereo) msp3400 2-0040: Audmode: 0x0001 msp3400 2-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 2-0040: ACB: 0x0c00 ivtv0: Video Input: Tuner 1 ivtv0: Audio Input: Tuner 1 ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 720x480, 30 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 7500000, Peak 8500000 ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 8 ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv0: Status flags: 0x00000000 ivtv0: Stream encoder MPEG: status 0x0118, 1% of 4096 KiB (128 buffers) in use ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv0: Read MPEG/VBI: 256249856/0 bytes ivtv0: ================== END STATUS CARD #0 ================== Card 0, channel 13 (no sound, note the msp3400 sound error). Status Log: ivtv0: ================= START STATUS CARD #0 ================= tveeprom 2-0050: Hauppauge model 32032, rev B310, serial# 7046004 tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has no radio, has IR remote tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 211.25 MHz tuner 2-0061: Standard: 0x0000b000 saa7115 2-0021: Audio frequency: 48000 Hz saa7115 2-0021: Input: Composite 4 saa7115 2-0021: Video signal: broadcast/DVD saa7115 2-0021: Frequency: 60 Hz saa7115 2-0021: Detected format: NTSC saa7115 2-0021: Width, Height: 720, 480 msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 2-0040: Audio: volume 58950 msp3400 2-0040: Standard: could not detect sound standard (mono) msp3400 2-0040: Audmode: 0x0001 msp3400 2-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 2-0040: ACB: 0x0c00 ivtv0: Video Input: Tuner 1 ivtv0: Audio Input: Tuner 1 ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 720x480, 30 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 7500000, Peak 8500000 ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 8 ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv0: Status flags: 0x00000000 ivtv0: Stream encoder MPEG: status 0x0118, 2% of 4096 KiB (128 buffers) in use ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv0: Read MPEG/VBI: 61718528/0 bytes ivtv0: ================== END STATUS CARD #0 ================== card 1, channel 8 (good recording with sound) Status Log: ivtv1: ================= START STATUS CARD #1 ================= tveeprom 3-0050: Hauppauge model 32032, rev B310, serial# 7045941 tveeprom 3-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is MSP4448 (idx 27) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has no radio, has IR remote tuner 3-0061: Tuner mode: analog TV tuner 3-0061: Frequency: 181.25 MHz tuner 3-0061: Standard: 0x0000b000 saa7115 3-0021: Audio frequency: 48000 Hz saa7115 3-0021: Input: Composite 4 saa7115 3-0021: Video signal: broadcast/DVD saa7115 3-0021: Frequency: 60 Hz saa7115 3-0021: Detected format: NTSC saa7115 3-0021: Width, Height: 720, 480 msp3400 3-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 3-0040: Audio: volume 58950 msp3400 3-0040: Standard: 4.5 M BTSC-Stereo (stereo) msp3400 3-0040: Audmode: 0x0001 msp3400 3-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 3-0040: ACB: 0x0c00 ivtv1: Video Input: Tuner 1 ivtv1: Audio Input: Tuner 1 ivtv1: Tuner: TV ivtv1: Stream: MPEG-2 Program Stream ivtv1: VBI Format: No VBI ivtv1: Video: 720x480, 30 fps ivtv1: Video: MPEG-2, 4x3, Variable Bitrate, 7500000, Peak 8500000 ivtv1: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv1: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC ivtv1: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv1: Temporal Filter: Manual, 8 ivtv1: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv1: Status flags: 0x00000000 ivtv1: Stream encoder MPEG: status 0x0118, 3% of 4096 KiB (128 buffers) in use ivtv1: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv1: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv1: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv1: Read MPEG/VBI: 65236928/0 bytes ivtv1: ================== END STATUS CARD #1 ================== card 1, channel 13 (good recording with sound) Status Log: ivtv1: ================= START STATUS CARD #1 ================= tveeprom 3-0050: Hauppauge model 32032, rev B310, serial# 7045941 tveeprom 3-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is MSP4448 (idx 27) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has no radio, has IR remote tuner 3-0061: Tuner mode: analog TV tuner 3-0061: Frequency: 211.25 MHz tuner 3-0061: Standard: 0x0000b000 saa7115 3-0021: Audio frequency: 48000 Hz saa7115 3-0021: Input: Composite 4 saa7115 3-0021: Video signal: broadcast/DVD saa7115 3-0021: Frequency: 60 Hz saa7115 3-0021: Detected format: NTSC saa7115 3-0021: Width, Height: 720, 480 msp3400 3-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 3-0040: Audio: volume 58950 msp3400 3-0040: Standard: 4.5 M BTSC-Stereo (stereo) msp3400 3-0040: Audmode: 0x0001 msp3400 3-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 3-0040: ACB: 0x0c00 ivtv1: Video Input: Tuner 1 ivtv1: Audio Input: Tuner 1 ivtv1: Tuner: TV ivtv1: Stream: MPEG-2 Program Stream ivtv1: VBI Format: No VBI ivtv1: Video: 720x480, 30 fps ivtv1: Video: MPEG-2, 4x3, Variable Bitrate, 7500000, Peak 8500000 ivtv1: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv1: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC ivtv1: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv1: Temporal Filter: Manual, 8 ivtv1: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv1: Status flags: 0x00000000 ivtv1: Stream encoder MPEG: status 0x0118, 1% of 4096 KiB (128 buffers) in use ivtv1: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv1: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv1: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv1: Read MPEG/VBI: 86925248/0 bytes ivtv1: ================== END STATUS CARD #1 ================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
