Gregor Fuis wrote: > Zoltan Karcagi wrote: >> Gregor Fuis wrote: >> >>> Hello, I have an Club 3d ZAP 1101 card, which is recognized as Yuan >>> PG600. It gives me a black picture on tuner input, so I think tuner is >>> not recognized. Tuner on this card is Philips ST. Does somebody know if >>> this card should work with ivtv drivers. >>> >>> Thanks >>> >>> [ 1303.596007] ivtv: ==================== START INIT IVTV >>> ==================== >>> [ 1303.596012] ivtv: version 0.10.2 (tagged release) loading >>> [ 1303.596014] ivtv: Linux version: 2.6.19.2-iskratel SMP mod_unload >>> 586 REGPARM >>> [ 1303.596017] ivtv: In case of problems please include the debug info >>> between >>> [ 1303.596018] ivtv: the START INIT IVTV and END INIT IVTV lines, along >>> with >>> [ 1303.596020] ivtv: any module options, when mailing the ivtv-users >>> mailinglist. >>> [ 1303.596773] ivtv0: Autodetected Yuan PG600, Diamond PVR-550 card >>> (cx23416 based) >>> [ 1303.596803] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 17 (level, >>> low) -> IRQ 17 >>> [ 1304.296817] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >>> [ 1304.516341] ivtv0: Encoder revision: 0x02060039 >>> [ 1304.551837] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) >>> [ 1309.948567] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >>> [ 1310.143017] ivtv0: Registered device video4 for encoder MPEG (2 MB) >>> [ 1310.143393] ivtv0: Disabled encoder YUV device >>> [ 1310.143396] ivtv0: Disabled encoder VBI device >>> [ 1310.143398] ivtv0: Disabled encoder PCM audio device >>> [ 1310.543099] ivtv0: Initialized Yuan PG600, Diamond PVR-550, card #0 >>> [ 1310.543402] ivtv: ====================== NEXT CARD >>> ====================== >>> >> <snip> >> >> I have a "ZAP-TV1001 MCE" with an xceive xc2028 tuner. >> No tuner detected at all for your card and that fits the xceive, which >> needs to be activated via gpio. >> Are you sure about your tuner being philips? >> > I read it on a datasheet. I have a heatsink on it so I can't say for > sure. But it is not standard tuner package, it looks like it is just in > one chip.
Pictures of my card are on bttv-gallery.de, you might check them out to decide whether it is really the same as yours. > Can you help me trying to enable this xceive tuner to check if it works > with my card. Unfortunately it won't work with stock kernels. There is a project hosted on mcentral.de that aims to support it (amongst a couple of other devices), but the latest code there OOPSes with ivtv. Also the maintainer of that project announced that he plans to convert general tuner support entirely to userspace, and that work is currently in progress. IMHO there is not much to do until the conversion is complete... Regards, Zoltan > > Thanks! > > Best Regards, > Gregor Fuis > > > ------------------------------------------------------------------------ > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
